Read Sharp AR-AX1 (serv.man2) User Guide / Operation Manual online
AXIS 700
User’s Manual
Appendix B: The Parameter List
67
[Profile-Text]
Note that the parameters in this list applies to all
profiles parameters.
profiles parameters.
Description
=
Specifies the name of the scanning profile. This is the
name that will appear on the AXIS 700 message display.
name that will appear on the AXIS 700 message display.
X-Resolution
= 200
Specifies the resolution to be used for scanning in dots
per inch (dpi). Higher-resolution settings produce
higher-quality scanning. However, your documents
might take longer to scan. The resolutions available
depend on your scanner's capabilities.
per inch (dpi). Higher-resolution settings produce
higher-quality scanning. However, your documents
might take longer to scan. The resolutions available
depend on your scanner's capabilities.
Y-Resolution
= 200
Specifies the resolution to be used for scanning in dots
per inch (dpi).
per inch (dpi).
Data type
= Black & White
Specifies data type depending on the material you are
scanning and the imaging application you intend to use.
scanning and the imaging application you intend to use.
Paper orientation
= portrait
Specifies how the document should be scanned.
Image compression
=
Specifies the image compression.
File format
=
Specifies the file format.
Double-sided
= single-sided
Specifies whether the scanner should scan the
document on both sides of the paper. This feature is
only available for scanners that support duplex scanning.
document on both sides of the paper. This feature is
only available for scanners that support duplex scanning.
Document mode
=
Intensity
= 50
Specifies the level of intensity.
Contrast
= 50
Specifies the level of contrast. The contrast is the tonal
gradation between the highlights, midtones and shadows
in an image.
gradation between the highlights, midtones and shadows
in an image.
...
[Destinations]
Destinations
= x
Specifies the number of destinations defined in the AXIS
700.
700.
Destination0
=
Destination name
[
Destination name]
Description
=
Specifies the name of the file destination. This is the
name that will appear in the destination list on the AXIS
700 message display.
name that will appear in the destination list on the AXIS
700 message display.
Transfer method
=
Specifies how the scanned image should be sent.
Destination
=
Specifies the e-mail address of the e-mail recipient.
Information level
=
Specifies the amount of image information to be
included with the image. See [Clients] InformationLevel.
included with the image. See [Clients] InformationLevel.
Profile
=
Specifies the default scanning profile to be used.
Server
=
Specifies the Internet address of the FTP server on
which the scanned image will be stored.
which the scanned image will be stored.
User
=
Specifies the username for logging on to the FTP server.
Password
=
Specifies the password for logging on to the FTP server.
File name
=
Specifies the file name of the scanned image.
Index file
=
Specifies the number of digits for the sequence number.
Parameter name
Value
Description
Click on the first or last page to see other AR-AX1 (serv.man2) service manuals if exist.