Read Sharp AR-AX1 (serv.man2) User Guide / Operation Manual online
:
AXIS 700 User’s Manual
60
Displaying the Log File
The AXIS 700 log file automatically logs all events and errors that
have occurred since the last restart. You can access the log file using
one of these methods:
have occurred since the last restart. You can access the log file using
one of these methods:
•
Control panel
•
Web browser
Control Panel
Follow these steps to display the log file from the control panel:
1. Press Menu
a few times, until you reach the Advanced
menu.
2. Use
to
find
the
Server log option.
3. Press Enter
to enter the submenu.
4. Use
to scroll through the messages.
Write error on:
<server address>
<server address>
Insufficient access rights to the directory specified for the
file destination.
file destination.
No info file on:
<server address>
<server address>
The information file could not be stored on the FTP
server. Possible reasons are lack of memory or naming
conflicts. The image file will be removed.
server. Possible reasons are lack of memory or naming
conflicts. The image file will be removed.
Paper jam
Paper jam in the scanner. Remove paper to continue
scanning.
scanning.
No paper in scanner
No paper in the sheetfeeder. Applies to scanners without
a flatbed only.
a flatbed only.
Scanner warming up
The scanner lamp must reach the correct temperature
and intensity.
and intensity.
Scanner not ready
The scanner is busy. Please try again. If the error occurs
repeatedly, contact your scanner supplier.
repeatedly, contact your scanner supplier.
Scanner not
connected
connected
Please check the scanner connection and try again.
Scanner not supported
The attached scanner is not supported. Scanning will not
work properly.
work properly.
Scanning failed
An error occurred during scanning. Please refer to earlier
messages.
messages.
Device is busy
Please try again later.
Message
Description
Click on the first or last page to see other AR-AX1 (serv.man2) service manuals if exist.