Read Sharp AR-810 (serv.man4) Service Manual online
AR-651/810 ADJUSTMENT
3 - 38
3. 10. Adjustment of Exit/Reversal Unit
3. 10. 1. Adjustment of sideways deviation
at reverse discharging
When a paper sideways deviation occurs at
reverse discharging, the transport guide position
is adjusted through the following procedure.
(1) Open the exit side door.
(2) Loosen 6 screws fixing the transport guide.
(3) Remove 2 screws, and take off the plate.
(4) Set the plate lengthwise, and fix it again with
2 screws after adjusting the plate installing
position depending on the paper deviation
amount.
(5) Remove 2 screws, and take off the plate with the latch holder.
(6) Turn the latch holder to the opposite direction, and install it to the plate.
(7) Turn the plate upside down (with the long hole upside), and install it again with 2 screws after
adjusting the same amount as did in the above (4).
Click on the first or last page to see other AR-810 (serv.man4) service manuals if exist.