Read Sharp AR-651 (serv.man58) Technical Bulletin online
ARE543
Sharp Electronics (UK) Ltd., Technical Services Group
Spec change
1) 08 codes for controlling the temperature of the pressure roller were added.
(08-844-846 were added)
2) When a sheet is not set in the manual feed tray, the icon will be gray out in fear of
touching the icon of the manual feed tray in the special menu. (In the case of using the
manual feed tray, the setting is performed after putting the sheet, therefore if there is no
sheet on the tray, the manual feed tray related setting are now cannot be changed in
order to prevent the mis-operation.)
manual feed tray, the setting is performed after putting the sheet, therefore if there is no
sheet on the tray, the manual feed tray related setting are now cannot be changed in
order to prevent the mis-operation.)
3) 08 code for canceling the input number limit of continued original icon in a copy job
using RADF was added. (In 08-333 parameter, 2 was added)
4) In the case of copying with a cassette set as for the special paper, the cassette will be
out of target of auto cassette switch.
Note) These have been included from the version combination above-mentioned or later.
Addition and change to [Service hand book] following this upgrading.
1. Change of the setting mode (08)
Setting mode (08)
Cod
e
Name
Defau
lt
Acceptable
value
Contents
Before
chang
e
chang
e
0
0^1
0:9 times 1:4 times
333
Continued original
input number of
time
input number of
time
After
chang
e
chang
e
0
0^2
0:9 times 1:4 times
2 Unlimited
2 Unlimited
2. Addition of the setting mode(08)
Setting mode (08)
Cod
e
Items adjusted
Target
Functio
ns
Defaul
t
Accept
able
value
Contents
Operati
ng
Procedu
re
844
Transition time
of low speed
pre-run in
Ready
(Pressure
roller)
of low speed
pre-run in
Ready
(Pressure
roller)
ALL
7
0^12
0:Invalid 1:5 min. 2:10
min. 3:20 min. 4:30 min.
5:40 min. 6:50 min. 7:60
min. 8:70 min. 9:80 min.
10:90 min. 11:100 min.
12:120 min.
min. 3:20 min. 4:30 min.
5:40 min. 6:50 min. 7:60
min. 8:70 min. 9:80 min.
10:90 min. 11:100 min.
12:120 min.
845
Starting
temperature of
low speed pre-
run in Ready
(Pressure
roller)
(When "08-
844" is valid)
temperature of
low speed pre-
run in Ready
(Pressure
roller)
(When "08-
844" is valid)
ALL
9
0^16
0:50 1:55 2:60
3:65 4:70 5:75
6:80 7:85 8:90
9:95 10:100 11:105
12:110 13:115
14:120 15:125
16:130
3:65 4:70 5:75
6:80 7:85 8:90
9:95 10:100 11:105
12:110 13:115
14:120 15:125
16:130
846
Stopping
temperature of
low speed pre-
run in Ready
(Pressure
roller) (When
"08-844" is
valid)
temperature of
low speed pre-
run in Ready
(Pressure
roller) (When
"08-844" is
valid)
ALL
5
0^9
0:+5 1:+10 2:+15
3:+20 4:+25 5:+30
6:+35 7:+40 8:+45
9:+50
3:+20 4:+25 5:+30
6:+35 7:+40 8:+45
9:+50
1
Click on the first or last page to see other AR-651 (serv.man58) service manuals if exist.