Read Sharp AR-651 (serv.man25) User Guide / Operation Manual online
1
2
3
4
5
6
7
8
9
10
11
12
8
2. General Precautions
PRECAUTIONS (Cont.)
1
Handle and use the copier gently and carefully.
• Do not place anything on the paper drawers or the original feeding tray.
• Never allow the power cable to be trampled on or pinched between hard objects, otherwise an accident
• Never allow the power cable to be trampled on or pinched between hard objects, otherwise an accident
or electrical trouble might occur.
• Do not allow any metal items such as paper clips to fall into the copier.
2
Be sure to turn OFF the power switch (unless using the weekly timer mode):
• When you leave your office at night.
• If a power failure occurs.
• If a power failure occurs.
Caution: When turning OFF the power switch, be sure to do so only after the machine cycling
has come to a complete stop.
Be sure to disconnect the power-cord plug:
• When you do not intend to use the copier for an extended period of time.
Be sure to turn OFF the power switch immediately and call for service:
• If an unusual noise is heard from the copier.
• If the outside of the copier becomes unusually hot.
• If any part of this copier is damaged, or if it has been dropped.
• If the copier has been exposed to rain or liquid.
• If the outside of the copier becomes unusually hot.
• If any part of this copier is damaged, or if it has been dropped.
• If the copier has been exposed to rain or liquid.
3
It is recommended that only supplies made or designated by Sharp be used for the AR-
651/810 in order to optimize copy quality. All supplies should be stored in a cool, dry
area.
For optimum performance, it is recommended that 80
g
/m
2
xerographic bond paper of high quality be
used. Paper of lower quality may contain inherent properties such as excess paper dust and may lead to
premature servicing.
premature servicing.
WARNING:
1. Do not apply force or place heavy objects (4k
g
or more) on the original glass. Breaking the
glass may cause personal injury.
2. Do not place heavy objects on the copier. They may fall and injure you.
3. Do not lean on, apply force or place heavy objects on the finisher (optional). Personal injury or
3. Do not lean on, apply force or place heavy objects on the finisher (optional). Personal injury or
property damage may result.
4. Do not place some objects or step on the external LCF (Large Capacity Feeder)(optional). They
may fall and injure you.
Machine Noise Information
Ordinance3. GSGV, January 18, 1991: The maximum sound pressure level is equal to or less than
70dB(A) according to EN27779.
70dB(A) according to EN27779.
"BATTERY DISPOSAL"
THIS PRODUCT CONTAINS A LITHIUM PRIMARY MEMORY BACK-UP BATTERY THAT MUST BE
DISPOSED OF PROPERLY. PLEASE CONTACT YOUR LOCAL SHARP DEALER OR AUTHORISED
SERVICE REPRESENTATIVE FOR ASSISTANCE IN DISPOSING OF THIS BATTERY.
THIS PRODUCT CONTAINS A LITHIUM PRIMARY MEMORY BACK-UP BATTERY THAT MUST BE
DISPOSED OF PROPERLY. PLEASE CONTACT YOUR LOCAL SHARP DEALER OR AUTHORISED
SERVICE REPRESENTATIVE FOR ASSISTANCE IN DISPOSING OF THIS BATTERY.
Click on the first or last page to see other AR-651 (serv.man25) service manuals if exist.