Read Sharp AR-651 (serv.man19) Service Manual online
AR-651/810 RADF (DOCUMENT FEEDER) 16 - 66
(7) Reset circuit
This circuit generates a CPU reset signal when the power is turned ON and the power voltage is de-
tected to have become lower.
The level of IC5-6pin (OUT) is normally "H" after the power is turned ON. However, when the power is
turned OFF or the voltage of the +5V power supply is decreased to 4.25V or lower for some reason, the
level of IC5-6pin becomes "L" and the CPU is reset.
(8) EEPROM circuit
This circuit is an EEPROM to store ADF data and its peripheral circuit.
IC3 is a memory to store the adjustment value for reflection-type sensors, and data are sent/received
between IC3 and CPU using a 4-line type serial interface. Data saved in the IC3 is not erased even if the
power is turned OFF.
IC3-1pin (CS) is a chip selection terminal and its level is "H" when data are being sent/received.
IC3-2pin (SK) is a serial clock terminal, and the serial data are sent in synchronization with the clock
input which is input to this terminal.
IC3-3pin (DI) is a input terminal for serial data and IC3-4pin (DO) is an output terminal for serial data.
Click on the first or last page to see other AR-651 (serv.man19) service manuals if exist.