AR-505 (serv.man6). AR505 Service Manual-Installation Setup - Sharp Copying Equipment Service Manual (repair manual). Page 7

3) Slide the developing unit lock lever in the arrow direction to re-

lease lock. Hold the toner cartridge holder and slowly pull out the
developing unit until it stops.

4) Hold the developing unit strap, slide the developing unit lock lever

in the arrow direction again to release lock, and remove the devel-
oping unit.

1) Disconnect the 5P connector which connects the toner hopper

and the developing unit. Then remove the toner hopper fixing
screws (4 pcs.) of the developing unit.

2) Supply developer from the developer supply port of the develop-

ing unit.

3) Fix the toner hopper to the developing unit with the fixing screws

(4 pcs.) and connect the 5P connector between the toner hopper
and the developing unit. At that time, put the 5P connector har-
ness in the harness clamp attached to the toner hopper, and
process the harness.

illust.: AR-280

illust.: AR-280

AR-505

8/6/1999

4 – 6