Read Sharp AR-505 (serv.man6) Service Manual online
E. Upper and lower trays setting
1) Remove the tray packing fixing screw.
Lift the tray holder, and pull out the tray from the copier body until it
stops.
stops.
Remove the packing fixing screw (1 pc.) of the tray paper pressing
plate.
plate.
F. Paper size change
1) Fit the tray size lever to the size of paper to be used.
(The size lever is of the slide type. Slide it right and left to fit with the
size of paper to be used.)
size of paper to be used.)
2) Fit the partitioning plates A and B to the paper size.
3) Put paper on the tray.
Set paper on the tray. At that time, do not exceed the indication
line.
line.
4) Change the display of the paper size display.
5) Install the tray.
Note: Push the tray completely to the bottom.
G. Developing unit setting
(1) Remove the developing unit
1) Open the front cabinet.
2) Tilt the developing unit lever toward you, and pull out the toner
cartridge until it stops.
Size lever
Partitioning plate A
Partitioning plate B
Paper size
display
display
B4
A4
A4
A3
R
B5
B5
A5
R
Paper size
display
SP
ECIAL
ECIAL
This section is folded
inside.
inside.
AR-505
4 – 5
8/6/1999
Click on the first or last page to see other AR-505 (serv.man6) service manuals if exist.