Read Sharp AR-405 (serv.man4) Service Manual online
No.
AR-280/285/335
AR-405
Page
Section
Content
Change
Remark
5 – 4
[5] – 2 – C
Illustration (Drum positioning plate shape)
change
change
•
Transfer/separation charger unit wire cleaning
•
Transfer/separation charger unit wire cleaning
1
Slightly lift the transport section open/close
lever and tilt it to the right.
lever and tilt it to the right.
1
Slightly lift the transport section open/close
lever and tilt it to the right.
lever and tilt it to the right.
2
Remove the driver transfer separation
charger fixing screw, and remove the
transfer/separation charger unit from the
copier body.
charger fixing screw, and remove the
transfer/separation charger unit from the
copier body.
2
Remove the driver transfer separation
charger fixing screw, and remove the
transfer/separation charger unit from the
copier body.
charger fixing screw, and remove the
transfer/separation charger unit from the
copier body.
5 – 6
[5] – 2 – 6
Illustration (Drum positioning plate shape)
change
change
G.
Developing unit setting
G. Developing unit setting
(1) Remove the developing unit.
(1) Remove the developing unit.
1
Open the front cabinet.
1
Open the front cabinet.
2
Tilt the developing unit lever toward you,
and pull out the toner cartridge until it stops.
and pull out the toner cartridge until it stops.
2
Tilt the developing unit lever toward you,
and pull out the toner cartridge until it stops.
and pull out the toner cartridge until it stops.
Printer kit AR-PB2 installation procedure added.
AR-405
– 2 –
1/21/1999
Click on the first or last page to see other AR-405 (serv.man4) service manuals if exist.