Read Sharp AR-337 Handy Guide online
FIRMWARE REVISION
SHARP ELECTRONICS (UK) LTD
DOCUMENT SYSTEMS GROUP
34
VERSION 1C
MARCH 2002
AR505
ICU
PCU
OPE
Revision/Correction Made
A5.10 A5.10 A5.10
•
Corrected the border location for multi-shot & repeat copy.
•
Corrected possible paper jams when entering the AR-FN3
during staple mode printing.
during staple mode printing.
•
Changed the width of margin on the copies that are made in
the combination of dual page copy & margin shift modes.
the combination of dual page copy & margin shift modes.
A5.11
•
Corrects Z folding and paper mis-feeds when feeding from
the LCC in duplex copy mode.
the LCC in duplex copy mode.
Finishers
FN1
FN2
FN3
Revision/Correction Made
2.00 1.00 2.1A
•
Production start.
1.01
•
Changed the method of controlling the alignment plate and
paddle to improve staking ability when staple sort mode is
selected.
paddle to improve staking ability when staple sort mode is
selected.
1.03
•
Upgraded due to the release of AR405.
•
Correct paper misfeeds when printing face down (AR405 only)
2.10
•
Include one-way clutch when shipping clutch when shipping.
2.13
•
Upgrade due to release of AR405 and ARPB2.
3.20
•
Upgraded to ARFN1N.
3.22
•
Changed the number of times the alignment plate operates
from twice to once for copying operation in staple mode.
from twice to once for copying operation in staple mode.
1.04
•
To correct error detection when the boomerang arm is
interrupted by the tilt tray when first powered on.
interrupted by the tilt tray when first powered on.
Document Feeders
RF1
RF2
RSPF
Revision/Correction Made
C.11 C.11 v.44
•
Production start.
v.45
•
To improve the original paper feeding performance when
using duplex copying – the operation timing of the paper
feeding motor and the pressure solenoid has been changed.
using duplex copying – the operation timing of the paper
feeding motor and the pressure solenoid has been changed.
•
The problem of multiple copying has been corrected (M/C
locked if a jam occurred after second and following pages
copied.
locked if a jam occurred after second and following pages
copied.
Desk Units
DE1
DE7
Revision/Correction Made
1.01 1.01
•
Production start.
2.01
•
To support AR405 (upgrade to AR-DE1N)
Click on the first or last page to see other AR-337 service manuals if exist.