Read Sharp AR-286 (serv.man10) User Guide / Operation Manual online
7-22
CHAPTER
7
Staple sort
The STAPLE SORT mode staples A4 (8-1/2" x 11") size copies.
Stapled sets cannot be delivered to the top tray.
Stapled sets cannot be delivered to the top tray.
NOTE:
Different size originals cannot be copied onto copy paper of their
respective sizes in the STAPLE SORT mode. Only A4 (8-1/2" x 11")
size paper can be selected in the STAPLE SORT mode.
Different size originals cannot be copied onto copy paper of their
respective sizes in the STAPLE SORT mode. Only A4 (8-1/2" x 11")
size paper can be selected in the STAPLE SORT mode.
Using the SPF/RADF
1
Set the originals in the document feeder tray.
●
If the number of copies in one set is more than 30, the copies
will not be stapled.
will not be stapled.
●
If the orientation of the originals does not match that of the copy
paper, the images of the originals will be rotated. The stapling
position in this case is shown below.
paper, the images of the originals will be rotated. The stapling
position in this case is shown below.
AR-281
AR-286/AR-336
●
If originals in the landscape orientation are copied, the copies
will be stapled at an improper position.
will be stapled at an improper position.
AR-281
AR-286/AR-336
2
Press the OUTPUT key.
3
Press the “STAPLE SORT” key on the touch panel.
AR-281
AR-286/AR-336
Stapling position
Stapling position
AUTO
EXPOSURE
READY TO COPY.(DOCUMENT FEEDER MODE)
OUTPUT
TOP TRAY
SORT
OFFSET
TRAY
STAPLE
SORT
GROUP
OK
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO A4
FINISHER (AR-FN2)
OPTIONAL EQUIPMENT
Finisher (AR-FN2)
Click on the first or last page to see other AR-286 (serv.man10) service manuals if exist.