Read Sharp AR-286 (serv.man10) User Guide / Operation Manual online
7-19
CHAPTER
7
Paper feed area cover
Top cover
Top tray
Offset tray
Stapler cover
Staple cartridge
CAUTION
Do not put pressure on the finisher or subject it to undue force.
FINISHER (AR-FN2)
The copier has two different finisher modes: one sorts copies into sets
matching the sequence of the originals and the second groups copies by
original. When the optional finisher (AR-FN2) is installed, the copier can
automatically staple the sorted copies. Each collated set of copies or
group of copies can be stacked offset from the previous set.
matching the sequence of the originals and the second groups copies by
original. When the optional finisher (AR-FN2) is installed, the copier can
automatically staple the sorted copies. Each collated set of copies or
group of copies can be stacked offset from the previous set.
PART NAMES
Specifications
Tray capacity
Top tray:
250 sheets
Offset tray: 750 sheets
Paper size
Top tray:
A3 to A6R
(5-1/2" x 8-1/2" to 11" x 17", 12" x 18")
(5-1/2" x 8-1/2" to 11" x 17", 12" x 18")
Offset tray: A4 (8-1/2" x 11")
Paper weight
Top tray:
52 to 128
g
/m
2
(14 lbs. to 34 lbs.)
Offset tray: 56 to 128
g
/m
2
(15 lbs. to 34 lbs.)
For paper weighing more than 105
g
/m
2
(28 lbs.),
A4 (8-1/2" x 11") is the maximum size.
Offset
Min. 15 mm for A4 (61/64 inch for 8-1/2" x 11")
Paper size
A4 (8-1/2" x 11")
for stapling
Stapling capacity
30 sheets (80
g
/m
2
(21 lbs.))
Power supply
Drawn from the copier
Weight
Approx. 22 k
g
(49 lbs.)
Dimensions
457 mm (W) x 518 mm (D) x 820 mm (H)
(18"(W) x 20-13/32"(D) x 32-19/64"(H))
Specifications are subject to change for improvement without notice.
OPTIONAL EQUIPMENT
Finisher (AR-FN2)
Click on the first or last page to see other AR-286 (serv.man10) service manuals if exist.