Read Sharp AR-285 (serv.man12) Service Manual online
52
52 - 1
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the duplex print mode stacking capability. (Used to adjust the stop position of the paper tray width
direction alignment plate in the duplex unit. The adjustment is executed by changing the width direction alignment
plate home position in the software.)
direction alignment plate in the duplex unit. The adjustment is executed by changing the width direction alignment
plate home position in the software.)
Section
Duplex
Item
Operation
Operation/
Procedure
Procedure
1. Select mode B with [
↑
], [
↓
] keys.
2. Select the paper feed mode with the 10-key.
3. Press the [EXECUTE] key.
4. Select mode A with [
↑
], [
↓
] keys.
5. Enter the adjustment value with the 10-key.
6. Press the [EXECUTE] key.
If there is no paper on the duplex tray, paper feed is performed in the paper feed mode selected in mode B and one sheet
of paper is transported to the duplex tray. Then the value set in procedure 5 is set and the alignment plate is operated
according to the home position corresponding to the set value.
When the set value is changed by "1", it is changed by about 0.2mm.
When the set value is increased, the alignment plate paper width is decreased.
The set value is in the range of
of paper is transported to the duplex tray. Then the value set in procedure 5 is set and the alignment plate is operated
according to the home position corresponding to the set value.
When the set value is changed by "1", it is changed by about 0.2mm.
When the set value is increased, the alignment plate paper width is decreased.
The set value is in the range of
±
50 with 50 at the center.
Set item
A: Alignment plate adjustment value (Default: 50)
B: Paper feed mode selection
1 : Manual
2: Upper cassette
3: Lower cassette
4: Desk top cassette
5: Desk middle cassette
6: Desk bottom cassette
7: LCC
Note
8 – 106
Click on the first or last page to see other AR-285 (serv.man12) service manuals if exist.