AR-285 (serv.man111). Fixing ARPB2 F9 00 error messages. (WHITE) - Sharp Copying Equipment Technical Bulletin (repair manual). Page 2

Read Sharp AR-285 (serv.man111) Technical Bulletin online

NIS12062000-1
Sharp Electronics (UK) Ltd., Technical Services Group
Condition 3:
When updating the ARPB2 firmware from 1.45 directly to 3.22
The first data address in a v1.45 Flash ROM is different to the first data address in a v3.22
Flash ROM. Due to this difference, when upgrading between these versions, an F9:00
occurs.
Fix:
You can overcome this problem by:
a) upgrading directly from v1.45 to v4.37(AR-PB2A),
b) upgrading from v2.21 or v2.32 to v3.22.
If you have already upgraded a Flash ROM from v1.45 to v3.22, and it is exhibiting F9:00
errors you should replace the Flash ROM and upgrade the replacement directly to v4.37.
Condition 4:
If the PB2 Flash ROM is faulty.
Fix:
Replace the ARPB2 Flash ROM.
Condition 5:
If additional Installed RAM is faulty.
Fix:
Replace the RAM and check whether F9:00 errors still occur.
Condition 6:
If the Copier Engine Firmware is not at the latest level.
Fix:
Check the Sharp Technical Website, and confirm that that the Engine firmware is at the
latest level.
Page of 2
Display

Download Sharp AR-285 (serv.man111) Technical Bulletin