Read Sharp AR-280 (serv.man12) Service Manual online
Purpose
Section
Item
Function (Purpose)
Code
Main
Sub
Setting
Image process
(Photoconductor/
Developing/Transfer/
Cleaning)
(Photoconductor/
Developing/Transfer/
Cleaning)
Operation
Used to set the correction vlaues of
various parameters (maincharger grid
voltage, laser beam power, developing
bias voltage) in the image forming
operation and image forming section
correction for OPC drum type A.
various parameters (maincharger grid
voltage, laser beam power, developing
bias voltage) in the image forming
operation and image forming section
correction for OPC drum type A.
44
15
Fixing (Fusing)
Operation
Used to set the fusing operation mode
(paper curl corresponding mode).
(paper curl corresponding mode).
26
15
Fixing (Fusing)
Operation
Used to set the fusing temperature in
each operation mode.
each operation mode.
43
1
ICU
Specifications
Operation
mode
(Common)
mode
(Common)
Used to set the A2 copy unit functions.
(Target models: AR-F230/S280/F280S/
F280R/S330/280/285/335)
(Target models: AR-F230/S280/F280S/
F280R/S330/280/285/335)
69
1
ICU
Operation
Used to set the IC fan operating
temperature. (Operation in pre-heat mode.)
(Excluding Japan models.)
temperature. (Operation in pre-heat mode.)
(Excluding Japan models.)
26
36
Auditor
Specifications
Used to set the specifications of the
auditor. Setting must be made depending
on the use condition of the auditor.
auditor. Setting must be made depending
on the use condition of the auditor.
3
Communication unit
(TEL/LIU/MODEM etc.)
(TEL/LIU/MODEM etc.)
Specifications
Operation
mode
(Common)
mode
(Common)
Used to set the operation specifications
when a communication trouble occurs
between the host computer and MODEM
(on the copier). (When a communication
trouble occurs between the host computer
and MODEM (copier), the self diag display
(U7-00) is printed and setting is made to
select inhibit/allow of printing.)
when a communication trouble occurs
between the host computer and MODEM
(on the copier). (When a communication
trouble occurs between the host computer
and MODEM (copier), the self diag display
(U7-00) is printed and setting is made to
select inhibit/allow of printing.)
27
1
Communication unit
(TEL/LIU/MODEM etc.)
(TEL/LIU/MODEM etc.)
Data
Used to enter the start time and the end
time of servicing for management of
service work. (The data can be checked
by the host computer.)
time of servicing for management of
service work. (The data can be checked
by the host computer.)
4
Communication unit
(TEL/LIU/MODEM etc.)
(TEL/LIU/MODEM etc.)
Data
Used to enter the TAG No. of the copier.
(This simulation allows to check the
machine TAG No. with the host
computer.)
(This simulation allows to check the
machine TAG No. with the host
computer.)
5
Communication unit
(TEL/LIU/MODEM etc.)
(TEL/LIU/MODEM etc.)
Data
User data
Used to set and change the host
computer/MODEM numbers. (This setting
is required when a communication is
made between the copier and a computer
through MODEM.)
computer/MODEM numbers. (This setting
is required when a communication is
made between the copier and a computer
through MODEM.)
2
Communication unit
(TEL/LIU/MODEM etc.)
(TEL/LIU/MODEM etc.)
Data
User data
Used to set and change the host
computer/MODEM numbers. (This setting
is required when a communication is
made between the copier and a computer
through MODEM.)
computer/MODEM numbers. (This setting
is required when a communication is
made between the copier and a computer
through MODEM.)
3
Others
Operation
Used to set the RPM of the fan motor un
the low speed rotation mode (ready
condition).
the low speed rotation mode (ready
condition).
26
32
Setting/Operation
test/check
test/check
Operation
Used to set the aging operation
conditions.
conditions.
7
1
Operation
Used to set the cycle of intermittent aging.
6
Operation
Used to set YES/NO of display of the
warmup time.
warmup time.
8
Setting/Data clear
Memory
Others
Used to format the hard disk. (Target
models: AR-S330/280/285/335)(Models
with the hard disk installed only)
models: AR-S330/280/285/335)(Models
with the hard disk installed only)
62
1
Setting/Operation data
output/Check
(Display/Print)
output/Check
(Display/Print)
Operation
Used to execute shading correction and
display the correction value.
display the correction value.
46
17
Operation test/check
Paper transport
Operation
Used to check the operation of sensors
and detectors in the paper feed section
(desk feed, large capacity tray) and the
related circuit.
and detectors in the paper feed section
(desk feed, large capacity tray) and the
related circuit.
4
2
Paper transport
Operation
Used to check the operation of the loads
in the paper feed section (desk paper
feed, large capacity tray) and the control
circuits.
in the paper feed section (desk paper
feed, large capacity tray) and the control
circuits.
3
Paper transport
Operation
Used to check the operation of sensors
and detectors in the paper feed section
and the related circuits.
(The operations of sensors and detectors
in the paper feed section can be
monitored with the LCD.)
and detectors in the paper feed section
and the related circuits.
(The operations of sensors and detectors
in the paper feed section can be
monitored with the LCD.)
30
2
8 – 13
Click on the first or last page to see other AR-280 (serv.man12) service manuals if exist.