Read Sharp AR-275 (serv.man2) Handy Guide online
AR-235/275
Technical Information Pack
Document Systems Support
13
7.
Simulation Codes Activation
Simulation codes allow the copier engineer to test certain operations of the machine, and
also allow access to counter information and other operational variables. It is implemented to
assist the engineer in support of the product and it is important, therefore, that this mode of
operation is not be disclosed to users.
also allow access to counter information and other operational variables. It is implemented to
assist the engineer in support of the product and it is important, therefore, that this mode of
operation is not be disclosed to users.
The key sequence required to enter the copier simulation mode is as follows :
# - INTERRUPT - CLEAR - INTERRUPT
Once in simulation mode, a ‘main’ code and a ‘sub’ code relating to the required operation
must be entered :
must be entered :
Main Code - START Key - Sub Code - START Key
Entering the fax simulations
If the optional fax kit (AR-FX4) has been installed, it is possible to enter the fax simulation
(diagnostic) mode by use of the following key sequence :
(diagnostic) mode by use of the following key sequence :
Function
9
*
8
#
7
Using copier simulation mode and then main code 66 also gives access to fax simulations.
Refer to service manual for details.
Refer to service manual for details.
Click on the first or last page to see other AR-275 (serv.man2) service manuals if exist.