Read Sharp AR-275 (serv.man10) Service Manual online
AR-235/275 SIMULATION - 2
C. Simulation operation and procedure basic pattern
The pattern numbers in the table below are specified to the detailed procedures described below (for each simulation). Refer to them as necessary.
No.
Simulation operation and
procedure pattern
Screen type
Operations and procedures common to every pattern
1
Used to set the
adjustment only.
adjustment only.
Adjustment value
input menu
input menu
Enter the adjustment value with the 10-key and press the [OK] key.
If the input value is within the set range, it is stored. If it is outside the set range, it is not
set.
If the input value is within the set range, it is stored. If it is outside the set range, it is not
set.
2
Used to select the mode
and set the adjustment
value.
and set the adjustment
value.
Mode selection menu
Select the mode with the 10-key and press the [OK] key, and the menu shifts to the
adjustment value input menu.
adjustment value input menu.
Adjustment value
input menu
input menu
Enter the adjustment value with the 10-key and press the [OK] key.
If the input value is within the set range, it is stored. If it is outside the set range, it is not
set.
Pressing the [BACK] key returns to the mode selection menu.
If the input value is within the set range, it is stored. If it is outside the set range, it is not
set.
Pressing the [BACK] key returns to the mode selection menu.
3
Used to set the
adjustment value and
output.
adjustment value and
output.
Adjustment value
input menu
input menu
Enter the adjustment value with the 10-key and press the [OK] key, and the menu goes
to the execution display.
If the input value is within the set range, it is stored. If it is outside the set range, it is not
set.
to the execution display.
If the input value is within the set range, it is stored. If it is outside the set range, it is not
set.
Execution menu
During execution, [EXEC] is highlighted.
Pressing the [BACK] key interrupts the operation and returns to the adjustment value
input menu.
Pressing the [BACK] key interrupts the operation and returns to the adjustment value
input menu.
4
Used to select the mode
and set the adjustment
value and make an
output.
and set the adjustment
value and make an
output.
Mode selection menu
Select the mode with the 10-key and press the [OK] key, and the menu shifts to the
adjustment value input menu.
adjustment value input menu.
Adjustment value
input menu
input menu
Enter the adjustment value with the 10-key and press the [OK] key, and the menu goes
to the execution display.
If the input value is within the set range, it is stored. If it is outside the set range, it is not
set.
Pressing the [BACK] key returns to the mode selection menu.
to the execution display.
If the input value is within the set range, it is stored. If it is outside the set range, it is not
set.
Pressing the [BACK] key returns to the mode selection menu.
Execution menu
During execution, [EXEC] is highlighted.
Pressing the [BACK] key interrupts the operation and returns to the adjustment value
input menu.
Pressing the [BACK] key interrupts the operation and returns to the adjustment value
input menu.
5
1 sheet print mode
Mode selection menu
Enter the adjustment value with the 10-key and press [
←
] key to shift to the next mode,
and press [
→
] key to shift to the previous mode. Press the [START] key to make 1 sheet
print.
Pressing the [OK] key shifts to the adjustment value input menu.
If the input value is within the set range, it is stored. If it is outside the set range, it is not
set.
Pressing the [OK] key shifts to the adjustment value input menu.
If the input value is within the set range, it is stored. If it is outside the set range, it is not
set.
Adjustment value
input menu
input menu
Press the adjustment value with the 10-key and press the [START] key to make 1 sheet
print.
After completion of print, the mode selection screen appears.
print.
After completion of print, the mode selection screen appears.
6
Used to clear.
Initial menu
Pressing the [OK] key shifts to the confirmation display.
Confirmation menu
The confirmation message is displayed. Press the [OK] key to clear.
Pressing the [BACK] key returns to the initial menu without cleaning.
Pressing the [BACK] key returns to the initial menu without cleaning.
7
Used to select the item to
clear and execute
clearing.
clear and execute
clearing.
Selection menu
Select the counter to clear with the 10-key and press the [OK] key, and the menu goes to
the confirmation display.
the confirmation display.
Confirmation menu
The confirmation message is displayed. Press the [OK] key to clear.
Pressing the [BACK] key returns to the selection menu without cleaning.
Pressing the [BACK] key returns to the selection menu without cleaning.
8
Used to operate loads.
Initial menu
Pressing the [OK] key shifts to the execution display.
Execution menu
During execution of load operation, [EXEC] is highlighted.
Pressing the [BACK] key interrupts the operation and returns to the initial menu.
Pressing the [BACK] key interrupts the operation and returns to the initial menu.
9
Used to select the load to
operate and operate the
load.
operate and operate the
load.
Selection menu
The names of the loads which can be operated are displayed. Select one with the 10-key
and press the [OK] key, and the menu will go to the execution menu.
and press the [OK] key, and the menu will go to the execution menu.
Execution menu
During execution of load operation, [EXEC] is highlighted.
Pressing the [BACK] key interrupts the operation and returns to the mode selection
menu.
Pressing the [BACK] key interrupts the operation and returns to the mode selection
menu.
10
Used to set the number of
times, the magnification
ratio, and the original
size, and check the
operations.
(Scanner unit)
times, the magnification
ratio, and the original
size, and check the
operations.
(Scanner unit)
Input menu of the
number of times
number of times
Select the mode with the 10-key and press the [OK] key, and the menu shifts to the
magnification ratio and original size setup menu.
magnification ratio and original size setup menu.
Magnification ratio
and original size
setup menu
and original size
setup menu
Select the magnification ratio with [
↑
][
↓
] keys. (Fixed magnification ratio)
Set the magnification ratio to a desired level with [
←
][
→
] keys. (1% increment)
Select the original size with the [PAPER SIZE] key.
Pressing the [OK] key shifts to the execution display.
Pressing the [BACK] key returns to the input menu of the number of times.
Pressing the [OK] key shifts to the execution display.
Pressing the [BACK] key returns to the input menu of the number of times.
Execution menu
The scanner unit is moved at the speed corresponding to the set magnification ratio and
the original size.
During execution, [EXEC] is highlighted.
Pressing the [BACK] key interrupts the operation and returns to the setup menu of the
magnification ratio and the original size.
the original size.
During execution, [EXEC] is highlighted.
Pressing the [BACK] key interrupts the operation and returns to the setup menu of the
magnification ratio and the original size.
Click on the first or last page to see other AR-275 (serv.man10) service manuals if exist.