Read Sharp AR-235 (serv.man9) Service Manual online
AR-235/275 SIMULATION - 29
When initializing each data: 50
Note: Executable only when the FAX is installed.
Operation/procedure
The FAX exposure level can be adjusted separately for each mode by
specifying a sub code. Since selection of Auto/Manual and Photo ON/
OFF is allowed separately for each mode, adjustments of 14 patterns
in total can be made.
specifying a sub code. Since selection of Auto/Manual and Photo ON/
OFF is allowed separately for each mode, adjustments of 14 patterns
in total can be made.
(Refer to 46-12, "Exposure adjustment table".)
Shading is performed to turn on the copy LED.
The current exposure value of the selected mode is displayed.
Enter the 2-digit adjustment value with the 10-key pad and push
START key. The entered value is set for the specified mode, and the
self print is made with the same magnification ratio for the mode.
START key. The entered value is set for the specified mode, and the
self print is made with the same magnification ratio for the mode.
Note: Executable only when the FAX is installed.
Operation/procedure (Pattern 5)
Select the mode with the arrow keys, enter the adjustment value with
the 10-key, and press the [OK] key.
the 10-key, and press the [OK] key.
When the [START] key is pressed, a print is made and the display
returns to the mode selection menu.
returns to the mode selection menu.
(Auto adjustment)
Setup of various copy conditions: Similar to the normal copy mode.
Use of [SPECIAL FUNCTION] key, [JOB STATUS] key, and [INTER-
RUPT] key is inhibited.
RUPT] key is inhibited.
Operation/procedure (Pattern 2)
Select the mode with the 10-key and press the [OK] key.
Enter the adjustment value with the 10-key and press the [OK] key, and
the entered value is registered.
Enter the adjustment value with the 10-key and press the [OK] key, and
the entered value is registered.
Pressing the [BACK] key returns to the mode selection.
Auto exposure mode
• When SIM 26-6 (Destination setup) is changed from EX to Japan,
the setup value becomes 1 (Default: Japan). If, on the contrary, it is
changed from Japan to EX, the set value becomes 2 (Default: EX)
changed from Japan to EX, the set value becomes 2 (Default: EX)
• If the auto exposure mode setup value is changed, the setup value
of SIM 46-30 (AE limit setup) is reset to the default value.
Operation/procedure (Pattern 2)
Select the mode with the 10-key and press the [OK] key.
Enter the adjustment value with the 10-key and press the [OK] key, and
the entered value is registered.
Enter the adjustment value with the 10-key and press the [OK] key, and
the entered value is registered.
Pressing the [BACK] key returns to the mode selection.
Mode
AE
Photo
Exposure adjustment
STD
(Standard
character)
(Standard
character)
Auto
ON
–
Manual
Auto
Auto
OFF
Individual adjustment
enable
(46-13 to 16)
Manual
Fine
(Small
character)
(Small
character)
Auto
ON
Manual
Auto
Auto
OFF
Manual
S-fine
(Fine)
(Fine)
Auto
ON
Manual
Auto
Auto
OFF
Manual
U-fine
(Super fine)
(Super fine)
Auto
ON
Manual
Auto
Auto
OFF
Manual
46-13 to 16
Purpose
Adjustment
Function
(Purpose)
(Purpose)
FAX exposure level adjustment (individual)
Sub code
Mode
13
STD (normal character)
14
Fine (small character)
15
S-fine (super fine)
16
U-fine (super fine)
46-18
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the copy contrast. (Inclination)
Item
Picture quality
(Initial screen)
(Input screen)
(Executing screen)
Sim46-18 GAMMA SET.
1:AE
50
2:TEXT 50
3:TEXT/PHOTO 50
1/3
50
Display items
Content
Setting
range
Default
1:AE
AE
1-99
50
2:TEXT
Character
Level 3.0
3:TEXT/PHOTO
Character/Photo
Level 3.0
4:PHOTO
Photo
Level 3.0
5:SUPER PHOTO
Super photo
Level 3.0
6:AE(TS)
AE(TS)
7:TEXT(TS)
Character (TS)
Level 3.0
8:TEXT/PHOTO(TS)
Character/Photo (TS)
Level 3.0
46-19
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to change the image quality in the exposure
mode.
mode.
Item
Picture quality
(Initial screen)
(Input screen)
Display items
Content
Default
1:AE MODE
(1:EXPOSURE
2:TONER)
Auto exposure mode
(1: Priority on Image quality,
(1: Priority on Image quality,
2: Priority on toner consumption)
2
2:AE STOP(COPY)
(0:FIXED
1:REAL TIME)
Auto exposure STOP mode (COPY)
(0: Fixed, 1: Real-time)
(0: Fixed, 1: Real-time)
0
3:AE STOP(FAX)
(0:FIXED
1:REAL TIME)
Auto exposure STOP mode (FAX)
(0: Fixed, 1: Real-time)
(0: Fixed, 1: Real-time)
0
4:AE STOP(SCAN)
(0:FIXED
1:REAL TIME)
Auto exposure STOP mode
(SCANNER)
(0: Fixed, 1: Real-time)
(SCANNER)
(0: Fixed, 1: Real-time)
0
5:1200dpi PHOTO
(1:SOFT
2:HARD)
1200dpi photo mode
(Countermeasures for claims on
dither)
(1: Soft mode, 2: Hard mode)
(1: Soft mode, 2: Hard mode)
1
46-20
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to correct SPF exprosure.
Item
Picture quality
Sim46-19 AE MODE
1:AE MODE
1
2:AE STOP(COPY) 0
3:AE STOP(FAX) 0
1/2
1
Sim46-19 AE MODE
1:AE MODE 1
(1:EXPOSURE
2:TONER)
[ 1- 2]
1
Click on the first or last page to see other AR-235 (serv.man9) service manuals if exist.