Read Sharp AR-235 (serv.man12) Service Manual online
AR-235/275 OTHERS - 2
2. User programs
User Program
Description
Default
Setting range
Auditing Mode
Enables or disables the basic auditing mode, which controls
access to copier.
access to copier.
Copies per Account
Displays the total number of copies made against account
numbers.
numbers.
Reset Account
Resets all audit accounts or selectively resets individual
accounts.
accounts.
Account Number
Control
Control
Registers accounts, deletes accounts or changes an account
number.
number.
Account Limit
Sets the maximum number of copies which can be made
against a registered account number.
against a registered account number.
Account Number
Security
Security
Guards against trial and error entering of audit account
numbers.
numbers.
Key Operator Number
Change
Change
Changes the key operator code number.
00000 (5 digits)
Exposure Adjust
Lightens or darkens copies in the automatic exposure mode.
Level 3
5 steps
Limit of Copies
Sets the maximum number of copies that can be selected.
999
Margin Default
Sets the initial margin shift values.
AB series: 5mm pitch (5 to 20mm),
Inch series: 1/4" pitch (1/4 to 1“)
Inch series: 1/4" pitch (1/4 to 1“)
Erase Adjust
Set the initial amount of the erase area.
AB series: 5mm pitch (5 to 20mm),
Inch series: 1/4" pitch (1/4 to 1")
Inch series: 1/4" pitch (1/4 to 1")
Initial Conditions
Sets the copier's initial settings in the ready condition.
Stream Feeding
Enables the stream feeding mode for copying from the optional
document feeder.
document feeder.
Rotation Copy
Enables/disables rotation of original images.
Sort Auto Select
Sets the default output mode.
Output Trays
Sets the output trays for the copy and printer modes.
Memory for Printer
Sets the memory assignment used for printer feature (optional
for AR-235 and AR-275).
for AR-235 and AR-275).
50%
30 to 70% (in the increment of 10%)
Offset Function
Enables/disables the offset function in the output tray.
Toner Save Mode
Reduces toner consumption.
Auto Power Off
Sets a time interval after which the copier enters the auto power
shut-off mode.
shut-off mode.
60 sec
10/30/60/90/120/240 min
Auto Clear
Sets a time interval after which the copier returns to the initial
settings.
settings.
60 sec
0/30/60/90/120/240 sec
Preheat Mode
Sets the time that elapses before the copier enters the preheat
mode after copying is completed.
mode after copying is completed.
15 min
0/1/2/5/10/15/30min
Message Time
Sets the length of time that messages are displayed.
Normal (6sec)
Slow (9 sec)/Normal (6sec)/Slow
(3 sec)
(3 sec)
Time Out Setting
Sets the time after which a print job resumes.
30 sec
0 sec (Immediate)/10 sec/30sec/
60sec
Disable Auto Paper
Selection
Selection
Prevents automatic paper selection.
Disable Auto Tray
Switching
Switching
Prevents automatic switching between the paper trays.
Disable Job Program
Changing
Changing
Prevents stored programs from being replaced or deleted.
Disable SPF/RSPF
Prevents the use of the optional document feeder when it
malfunctions.
malfunctions.
Disable Duplex Copy
Temporarily prevents the duplex system from operating when it
malfunctions. Allows the use of the copier but not the duplex
system.
malfunctions. Allows the use of the copier but not the duplex
system.
Disable Stapler
Prevents damage to the stapler while awaiting repair service.
(The stapler is included in the optional finisher (AR-FN5).)
(The stapler is included in the optional finisher (AR-FN5).)
Disable Center Tray
Counting
Counting
Disables count of paper output tray of the copier.
Disable PC/Modem
Provides or prevents access to key operator programs through
a PC/modem without key operator code entry.
a PC/modem without key operator code entry.
Disable Auto Power
Shut-off
Shut-off
Disables the auto power shut-off mode.
Disable Beep at Key
Touch
Touch
Enables or disables sounding of beep when keys are touched.
Disable Backlight
Change
Change
Disables change of LCD backlighting color.
Total Count
Recalls the total counts, including counts of the copier,
document feeder, duplex module, and stapler.
document feeder, duplex module, and stapler.
Click on the first or last page to see other AR-235 (serv.man12) service manuals if exist.