AR-203 (serv.man5). AR203 Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 119

AR-203E/5420/M200/M201  USER PROGRAM  12 - 2

∗ Factory default settings are indicated with an asterisk (*).
5) Press the start (

) key. The right-hand number in the display

will be steadily lit and the entered value will be stored.

Note: To change the setting or to set another mode, press the

clear key. The unit will return to step 2).

6) Press the light (

) key to return to the normal copy mode.

1) Press the [MENU] key and then press the [OK]/[ENTER] key.

In printer mode, the user programs are accessed by simply
pressing the [MENU] key.

2) Press the [

] key [

]

 or [

] key [

]

 to select the item

that you wish to configure in the USER PROGRAM items, and
then press the [OK]/[ENTER] key.

• See "1. User programs" for the program name and program

code.

• You can also select a program by directly entering the pro-

gram number with the numeric keys.

3) Press the [

] key [

] or [

] key [

] to change the set-

ting of the selected item.

• See "1. User programs" for the program code.

NOTE:

• If you mistakenly select the wrong item, press the [Clear] key

(

) and repeat the procedure from step 2).

• To cancel a setting for a user program, press the [MENU] key.

4)

Press the [OK]/[ENTER] key.

Your selection appears briefly and then the previous screen
appears.

NOTE:

When "AE LEVEL ADJUST" is selected in the user programs and
the [OK]/[ENTER] key is pressed, the automatic exposure
adjustment screen appears. Adjust the exposure and press the
[OK]/[ENTER] key.

25

Copy effective paper width 
setting function (Bypass 
tray)

*1 

→ Large (A4 width/

LETTER), 2 

→ Small (B5R 

width/INVOICE)

26

Copy effective paper width 
setting function (Tray)

*1 

→ Large (A4 width/

LETTER), 2 

→ Small (B5R 

width/INVOICE)

28

Selection of copy start 
state (Polygon rotation on/
off)

*1 

→ ON, 2 → OFF

29

Fusing temperature 
setting when the bypass 
tray is used

1 

→ Low, *2 → High

Program 

No.

Mode

Parameters

1

1

2

2

2

2

1

1

MAIN MENU
1:USER PROGRAM

MAIN MENU
1:USER PROGRAM

1

1

2

2

2

2

1

1

USER PROGRAM
2:PREHEAT MODE

USER PROGRAM
2:PREHEAT MODE

The machine sounds three different types of beep signals: a key
entry beep that sounds when a valid key is pressed, an invalid
key beep that sounds when an invalid key is pressed, and a base
setting beep that sounds when a setting is the same as the base
setting (base settings are explained below). The base setting
beep is initially disabled. If you wish to enable the base setting
beep, see "SOUND AT DEFAULT". If you wish to change the vol-
ume of the beep signals or disable them, see "KEY TOUCH
SOUND".

The beep patterns of each type of beep signal are as follows:

Key entry beep: One beep
Base setting beep: Three beeps

Invalid key beep: Two beeps

The base settings are preset standard selections for each copy
setting. The base settings are as follows:

Copy ratio: 100%
Light and Dark level: Center

Paper feed location: 

Tray 1 (Upper paper tray)

AUTO/TEXT/PHOTO: AUTO

1

1

2

2

2

2

1

1

PREHEAT MODE
1:1 MIN

PREHEAT MODE
1:1 MIN