Read Sharp AR-200 (serv.man9) User Guide / Operation Manual online
25
MAKING COPIES
1
Press the INTERRUPT key.
●
The copier will return to the initial settings.
●
If this copier has been programmed in the auditing mode using user
program No. 10, “
program No. 10, “
–––
” will appear in the copy quantity display. Enter
your account number using the numeric keys. The number of copies
of the interrupt copying will be accumulated against this account
number. See page 13.
of the interrupt copying will be accumulated against this account
number. See page 13.
●
When an optional SPF is being used, the copier will stop after
completing the copying of the original which has been fed into the
SPF.
completing the copying of the original which has been fed into the
SPF.
2
When the copier stops place an original for interrupt
copying on the original table or remove any remaining
originals on the SPF and replace with originals for
interrupt copying via the SPF.
copying on the original table or remove any remaining
originals on the SPF and replace with originals for
interrupt copying via the SPF.
3
Select the desired available copier functions.
4
Set the number of copies.
5
Press the START key.
●
The interrupt copies will be offset from the previous copies when user
program No. 19 is enabled.
program No. 19 is enabled.
6
When all INTERRUPT copies are finished, press the
INTERRUPT key again to cancel the INTERRUPT mode,
and remove the original used for interrupt copying.
INTERRUPT key again to cancel the INTERRUPT mode,
and remove the original used for interrupt copying.
●
The previous copy quantity, copy ratio, copy density, and paper size
will be automatically restored.
will be automatically restored.
7
Replace the original(s) for the interrupted job on the
original table or in the SPF and press the START key.
original table or in the SPF and press the START key.
INTERRUPTING A COPY RUN
INTERRUPT is used to interrupt a long copy run so that another job can be
done.
done.
●
If sort or group copying is being performed, sort or group cannot be
selected during interrupt copying. (Sort and group can be performed only
if an optional electronic sortring kit and an optional SPF are installed.)
selected during interrupt copying. (Sort and group can be performed only
if an optional electronic sortring kit and an optional SPF are installed.)
Interrupting a copy run
Click on the first or last page to see other AR-200 (serv.man9) service manuals if exist.