Read Sharp AR-200 (serv.man9) User Guide / Operation Manual online
17
MAKING COPIES
REDUCTION/ENLARGEMENT/ZOOM
Reduction/enlargement/zoom
Manual
1
Place the original on the original table and close the
platen cover.
platen cover.
2
Use the PRESET RATIO selector (
,
) keys and the
zoom (
,
) keys to select the desired copy ratio.
●
To select a preset reduction or enlargement copy ratio, press the
or
or
key repeatedly until the indicator for the desired copy ratio is lit.
A.
Preset reduction ratios are: 86%, 81%, 70%, and 50%.
B.
Preset enlargement ratios are: 115%, 122%, 141%, and 200%.
C.
Zoom ratios: Any ratio from 50% to 200% can be set, in 1%
increments. Press the
increments. Press the
or
key to set the approximate
ratio, then press the
key to decrease the ratio or the
key
to increase the ratio.
●
When a zoom (
,
) key is pressed, the ZOOM indicator will light
up and the zoom ratio will be displayed in the copy quantity display for
at least two seconds.
at least two seconds.
●
To verify a zoom setting without changing the zoom ratio, press and
hold down the copy ratio display (
hold down the copy ratio display (
) key. When the key is released,
the display will return to the copy quantity display.
●
To decrease or increase the zoom ratio rapidly, press and hold down
the
the
or
key. However the value will stop at the preset reduction
or enlargement ratios. To move beyond these ratios, release the key
and then press and hold it down again.
and then press and hold it down again.
D.
Same-size reset: Press the
or
key repeatedly until the
copy ratio returns to 100%.
3
Ensure that the desired paper tray is selected.
●
If the auto paper select function has been enabled, the appropriate copy
paper size will have been automatically selected based on the original
size and the selected copy ratio. If the selected PRESET RATIO
indicator or the ZOOM indicator blinks, the selected copy image is too
large for the copy paper size.
paper size will have been automatically selected based on the original
size and the selected copy ratio. If the selected PRESET RATIO
indicator or the ZOOM indicator blinks, the selected copy image is too
large for the copy paper size.
●
If the auto paper select function has been disabled or if copying onto
a different size paper, use the TRAY SELECT key to select the paper
feed station with the desired paper size.
a different size paper, use the TRAY SELECT key to select the paper
feed station with the desired paper size.
4
Set the number of copies and press the START key.
Click on the first or last page to see other AR-200 (serv.man9) service manuals if exist.