Read Sharp AR-156 Handy Guide online
Fax Simulation
Version 2.0
Issue 05/00
19
SHARP ELECTRONICS (UK) LTD
COPIER TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Entering Fax simulation mode from the Fax Panel
Step
Procedure
Operation
1
Press Function, 9,*,8,#,7
ROM version is displayed on LCD
2
Press Enter
Fax enters simulation mode
3
Press or to select mode
Each mode is displayed sequentially
4
Press Enter
The mode is determined
5
Selected mode actuates
Actuation
Entering Fax simulation mode from the Copier Panel
1
Press Clear, Exposure, Clear
Exposure
Exposure
Enter simulation mode
2
Enter 66
66 is displayed
3
Press Start Key
The Copier exits SIM & the Fax enters SIM mode
Then follow Steps 3,4 and 5 as shown previously.
Function List.
Mode
#
Mode
Details of Function
LCD Display
01
Soft Switch
Setting
Soft switch select & set up (SW1 to SW 30)
01:SOFT
SWITCH
SWITCH
02
Soft Switch
Clear
Used to clear Soft Switch set up
02:SOFT SW
CLEAR
03
ROM/RAM
Check
Checks RAM read/write & ROM check sum
03:ROM/RAM
CHECK
04
Signal Send
Mode
Used to send various signals to the line
04:SIGNAL SEND
10
Image Memory
Clear Mode
Used to clear the Image Data Memory
(DRAM)
10:IMAGE MEM
CLEAR
14
Dial Test-Pulse
Dial Pulse test mode at 10 PPS
14:DIAL TEST 10
PPS
16
Dial Test-Tone
Dial Test with DTMF
16:DIAL TEST
TONE
21
Soft Switch Mode
Print Out
Used to print the current Soft Switch Set Up.
21:PRINT SOFT
SW
42
Fax Panel Check
Used to check Keys & LED's on the Fax
Panel
42:FAX PANEL
TEST
43
Signal Detect
Used to detect signals on the line
43:SIG.DETECT
44
Long Distance
Communication
Select
Used to specify the other party Fax Numbers
Registered in the one touch/speed dial
44:LONG DIST
COMM
Click on the first or last page to see other AR-156 service manuals if exist.