AR-156 (serv.man10). AR156 Operation Manual - Sharp Copying Equipment User Guide / Operation Manual. Page 9

1

Getting started

: Two-sided copies from one-sided

originals.
Turn on Long Edge or Turn on
Short Edge can be selected.

: Two-sided copies from two-sided

originals. (Can be selected only
when the RSPF is used.)

: One-sided copies from two-sided

originals. (Can be selected only
when the RSPF is used.)

Exposure mode selector key and indicators
Use to sequentially select the exposure modes:
AUTO, MANUAL or PHOTO. Selected mode is
shown by a lit indicator. (p. 16)
Light and dark keys and exposure indicators
Use to adjust the MANUAL or PHOTO exposure
level. Selected exposure level is shown by a lit
indicator. (p.16)
Use to start and terminate user program setting.
(p. 21)
Alarm indicators

: Developer replacement required

indicator (p. 32)

: Misfeed indicator (p. 27)
: Toner cartridge replacement required

indicator (p. 23)

: Maintenance indicator (p. 32)

RSPF indicator (p. 13)
RSPF misfeed indicator (p. 30)
Copy ratio selector key and copy ratio
indicators
Use to sequentially select preset reduction/
enlargement copy ratios.
Selected copy ratio is shown by a lit indicator.
(p. 17)
Zoom indicator (p. 17)
Copy ratio display (%) key (p. 17)
Display
Displays the specified copy quantity, zoom copy
ratio, user program code, and error code.

ON LINE indicator
Lights up when the machine is used as a printer.
To use the copier as a printer, an optional printer
expansion kit is needed.
ON LINE key
Changes between the on-line and off-line
modes when the PCL expansion kit has been
installed and a PCL printer is used.
Changes modes from the off-line to on-line
when the GDI expansion kit has been installed
and a GDI printer is used.
DATA indicator
Indicates that the printer is receiving or
processing print data. To use the copier as a
printer, an optional PCL expansion kit is
needed.
Power save indicator
Lights up when the copier is in a power save
mode. (p. 20)
Tray select key
Use to select a paper feed station (paper tray
or bypass tray). (p. 19)
Paper feed location indicators
Light up to show the selected paper feed
station.
Zoom keys

●

Use to select any reduction or enlargement
copy ratio from 50 to 200% in 1% increments.
(p. 17)

●

Use to select the desired copy quantity (1 to
99). (p. 15)

●

Use to make user program entries. (p. 21)

●

Press to clear the display, or press during a
copy run to terminate copying. (p. 15)

●

Press and hold down during standby to
display the total number of copies made to
date. (p. 22)

●

Copying is possible when the indicator is on.

●

Use to set a user program.

Inch system

00C-1-156ex.p65

4/11/00, 9:35

7