Read Sharp AR-156 (serv.man10) User Guide / Operation Manual online
4
1
Getting started
CAUTIONS
Follow the cautions below when using this copier.
●
The fusing area is hot. Exercise care in this area when removing misfed
paper.
paper.
●
Do not look directly at the light source. Doing so may damage your eyes.
●
Do not switch the copier rapidly on and off. After turning the copier off, wait
10 to 15 seconds before turning it back on.
10 to 15 seconds before turning it back on.
●
Copier power must be turned off before installing any supplies.
●
Place the copier on a firm, level surface.
●
Do not install the copier in a humid or dusty location.
●
When the copier is not used for a long time, for example, for consecutive
holidays, turn the power switch off and remove the power cord from the outlet.
holidays, turn the power switch off and remove the power cord from the outlet.
●
When moving the copier, be sure to turn the power switch off and remove the
power cord from the outlet.
power cord from the outlet.
●
Do not cover the copier with a dust cover, cloth or plastic film while the power
is on. Doing so may prevent heat radiation, damaging the copier.
is on. Doing so may prevent heat radiation, damaging the copier.
●
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
specified herein may result in hazardous radiation exposure.
Cautions on laser
Wave length
770 nm - 795 nm
Pulse times
11.82 µs/7 mm
Output power
0.17 mW ± 0.01 mW
00C-1-156ex.p65
4/11/00, 9:35
4
Click on the first or last page to see other AR-156 (serv.man10) service manuals if exist.