AR-153EN (serv.man8). Please see AR122E Operation manual - Sharp Copying Equipment User Guide / Operation Manual. Page 13

Read Sharp AR-153EN (serv.man8) User Guide / Operation Manual online

11
3
This chapter explains basic and other copying functions. 
The unit is equipped with a one-page memory buffer. This memory allows the unit to 
scan an original once only and make up to 99 copies. This feature improves 
workflow, reduces operation noise from the copier, and provides higher reliability by 
reducing wear and tear on the scanning mechanism.
COPY FLOW
If the unit does not function properly during use, or if a function cannot 
be used, see "TROUBLESHOOTING THE UNIT" (p.26).
1 Make sure that paper has been loaded in the paper tray (p.8), 
and check the paper size (p.7). 
If paper is not loaded, see page 8. If you are using the single bypass, check 
the paper size and then proceed to the next step without loading paper.
2 Turn on the unit (p.12).
3 Place the original.
If you are using the original table, see "ORIGINAL PLACEMENT" (p.14).
When copying onto A4 paper or a large size, pull out the paper output tray 
extension.
5 Start copying.
Press the start (      ) key.
4 Select the copy settings.
If you wish to copy using the initial settings (p.13), proceed to the next 
step.
To set the number of copies, see page 15.
To adjust the resolution and contrast settings, see page 15.
To enlarge or reduce the copy, see page 17.
If you are using the single bypass
Do not press the start (      ) key. Insert a 
sheet of paper into the single bypass.
 (Page 10)
Multiple copies are not possible
using the single bypass.
3
MAKING COPIES
Page of 72
Display

Click on the first or last page to see other AR-153EN (serv.man8) service manuals if exist.