AR-235 (serv.man71). Supply of a service part for countermeasure against break of the boss for mounting the 2nd joint gear. - Sharp Copying Equipment Technical Bulletin (repair manual)

ar-235 (serv.man71) technical bulletin
Model
AR-235 (serv.man71)
Pages
4 Few pages! See other manuals at the bottom of the first or last page.
Size
231.31 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / Supply of a service part for countermeasure against break of the boss for mounting the 2nd joint gear.
File
ar-235-sm71.pdf
Date

Read Sharp AR-235 (serv.man71) Technical Bulletin online

 
 
 
Sharp Electronics (UK) Ltd., Document Systems Support
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Supply of a service part for countermeasure against 
break of the boss for mounting the 2nd joint gear 
1. Model Name AR-M236/M276 
AR-235/275/N275 
2. Symptom 
Depending on the grease or oil applied to the gear and periphery of the gear, the boss 
on the base plate mounting the 2nd joint gear on the rear side of the paper feeding 
section may break. 
3. Countermeasure  If the boss on the base plate mounting the 2nd joint gear on the rear side of the paper 
feeding section broke, it was necessary to replace the base plate. To improve 
serviceability, the drive support plate AS serving to substitute for boss has been newly 
supplied as a service part. 
When the boss on the base plate breaks, use the drive support plate AS for repair. 
For the mounting procedure of the drive support plate AS, refer to the attached sheets. 
When performing the above replacement, the screws fixing the 1st lift up unit must 
also be exchanged. (Refer to the attached mounting procedure.) 
   Drive support plate AS                            Mounting location 
 
TECHNICAL BULLETIN 
Date:  
29 February 2008 
Model:  
AR-M236/276 
                     AR-235/275 
Ref.:  
DCE699 
Colour:  
White 
Page:  
1 of 4 
 
 
 
Sharp Electronics (UK) Ltd., Document Systems Support
 
 
 
 
Current parts 
New parts 
No 
Model
name 
Version 
P/G 
No. 
Parts code 
Parts code 
Price
rank 
Q'ty 
Parts 
name 
Effec- 
tive 
time 
Inter-
change
ability
Note 
CPLTM0421QS01 AK 
Drive 
support 
plate 
17 - 
XEBS730P08000 
Screw 
(3
×8) 
31 -12 
XEBSD40P30000 XEBS740P35000 
AC 
Screw 
(4
×35) 
AR-M236 
AR-M237 
AR-M276 
AR-M277 
AR-185
AR-215
AR-235
AR-275
AR-N275
AR-M208 
AR-M208N 
AR-5127
ALL 
31 -34 
XEBSE40P12000 XEBS740P14000  AB  1 
Screw 
(4
×14) 
- 5  
<Interchange> 
1. Interchangeable. 
4. Not Interchangeable. 
2. Current type can be used in place of new type. 
New type cannot be used in place of current type. 
5. Interchangeable if replaced with same types of related
parts in use. 
3. Current type cannot be used in place of new type. 
New type can be used in place of current type. 
6. Others. 
Parts marked with "
" is important for maintaining the safety of the set. Be sure to replace these parts with specified 
ones 
for maintaining the safety and performance of the set. 
 
 
 
Sharp Electronics (UK) Ltd., Document Systems Support
 
 
 
 
 
 Mounting procedure of the drive support plate AS    
1. Remove the 1st lift up unit, paper feed clutch and 2nd joint gear. 
 
2. Cut the remainder of the boss using nippers, etc. 
 
 
  Cut condition 
 
3. Mount the drive support plate AS. 
 
 
 
 
 
 
 
Sharp Electronics (UK) Ltd., Document Systems Support
 
 
 
 
4. After mounting the two 2nd joint gears, attach the paper feed clutch. 
 
 
5. Mount the 1st lift up unit. 
    (1) Change of two screws (longer by 5 mm than the former), parts code after change:  
          XEBS740P35000 
    (2) Change of one screw (longer by 2 mm than the former), parts code after change:  
          XEBS740P14000 
 
 
 
 
 
 
Page of 4
Display

Download Sharp AR-235 (serv.man71) Technical Bulletin

Here you can read online and download Sharp AR-235 (serv.man71) Technical Bulletin in PDF. AR-235 (serv.man71) technical bulletin will guide through the process and help you recover, restore, fix, disassemble and repair Sharp AR-235 (serv.man71) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.