AR-122E (serv.man52). Online Manual - Sharp Copying Equipment User Guide / Operation Manual. Page 31

If nothing prints even when the unit is turned on, please wait a few moments. The unit needs a longer time to process  
intricate data. If the unit still does not print, refer to the check list below.

When the misfeed ( ) indicator blinks or (

) 

blinks in the display, the unit will stop because of a 

misfeed.

Remove the jammed paper as explained in 

"MISFEED REMOVAL" in the Operation Manual.

The ON LINE indicator on the operation panel turns 

off while the unit is used for copying. Printing is not 

possible at this time. When copying is finished, the 

ONLINE indicator will turn on after the set auto clear 

time elapses, and the unit will be ready for scanning 

and printing. You can also press the clear (

) key 

twice or press the ON LINE key to make the unit 

ready for printing.

When choosing "Print" from the "File" menu located in 

applications, be sure you have selected "SHARP AR-

122E" printer displayed in the "Print" dialog box.

Check if the printer driver has been installed, following 

the steps listed below.

On Windows 95/98/Me/NT 4.0/2000, click the "Start" 

button, select "Settings" and then click "Printers".

If you still cannot print after confirming the "SHARP 

AR-122E" printer driver icon, the printer driver may not 

have been installed correctly. In this case, delete 

SHARP Personal MFP series software and then 

reinstall it.

Reference:

Check here.

SHARP

AR-122E

SHARP AR-122E