AR-122E (serv.man15). Sect 4. External Views Internal Structures - Sharp Copying Equipment Service Manual (repair manual). Page 3

AR-122E/152E/153E/157E  EXTERNAL VIEWS AND INTERNAL STRUCTURES  4 - 3

When toner density is lower than a specified level, the TONER
DEVELOPER CARTRIDGE REPLACEMENT indicator lights up to
warn the user. If the Toner Developer Cartridge is not replaced in
that time, the Ready Lamp changes to blinking and then start to
supply the toner after around 10 copies. (Cartridge replacement
lamp continues to light.) If toner density is not back to specific level
after two minutes, the READY indicator goes out and Toner Devel-
oper indicator starts blinking, and the copier stops.

The ON LINE indicator and the start (

) indicator indicate the

state of the printer or scanner.

The ON LINE key is pressed and on line and off line are changed.

This scanning method can only be used if the Button Manager has
been installed using the installer. To scan using this method, you
must first complete the settings in Button Manager in your com-
puter. For more information on Button Manager, see the online
manual or the help file for Button Manager.

Note:

• Scanning is not possible during a copy job.

• If the unit is used to begin a scan job during a print job using the

parallel interface connection or the USB interface connection,
the scan job will be stored and scanning will begin when the print
job is completed.

• When scanning an original that has been placed in the SPF/

RSPF, only one original can be placed unless you are using
Sharpdesk. 

1) Press the SCANNER (

) key.

The unit enters scan mode.

2) Place the original you wish to scan on the original table/SPF/

RSPF.

For the procedure for placing the original, see "ORIGINAL
PLACEMENT".

3) Press the right copy quantity key to display the number of the

application that you wish to use for scanning.

The application numbers are initially as follows.

The application numbers are initially as follows.

4) Press the start (

) key.

The selected application launches and scanning begins.

On:

Indicates the unit is ready for copying or scanning is 
being performed.

Blinking: Indicates that an interrupt print job is in progress, or that 

the unit is initializing (the cover has been opened and 
closed or the power turned off and on).

Off:

Indicates copying or scanning is being performed or the 
unit is in the auto power shut-off mode.

On:

Indicates the unit is ready for printing or scanning is 
being performed. (On line)

Blinking: Printing or data is being received from a computer.

Off:

Copying is being performed. (Off line)

On:

Indicates the unit is in a power save mode.

On:

The SCANNER (

) key has been pressed and the unit 

is in scanner mode.

Blinking: A scan job is being executed from the computer, or scan 

data is stored in the unit's memory.

Off:

The unit is in the copy mode.

Power save indicator

Start indicator

ON LINE indicator

SCANNER indicator

Application 

number

Application launched

SC1

Sharpdesk (if installed)

SC2

E-mail (your standard e-mail program in the 
Windows OS you are using)

SC3

Fax (if a fax program is installed)

SC4

OCR (if an OCR program is installed)

SC5

Microsoft Word (if installed)

SC6

Any application set in Button Manager