AL-1566 (serv.man38). AL 1566 Fax Function Operation Manual - Sharp Copying Equipment User Guide / Operation Manual. Page 14

Explains the machine and how to use it as a copier. Also explains how to install the software that allows the machine 
to be used as a printer and scanner for your computer.

The following information is contained in the operation manual for the machine : 

This manual explains the procedures for using the machine as a printer and a scanner.

If desired, an answering machine or external telephone can be connected to the machine through the telephone 
jack, labeled "TEL," on the rear of the machine.

● Connecting an answering machine to the machine allows you to receive both voice and fax messages when you 

are out. To use this feature, first change the outgoing message of your answering machine, and then set the 
reception mode of the machine to "A.M." (Answering Machine mode) when you go out.

1. It is advisable to keep the length of the message under 10 seconds. If it is too long, you may have difficulty 

receiving faxes sent by automatic dialing.

2. Your callers can even leave a voice message and send a fax message on the same call. Modify your outgoing 

message to explain that this can be done by pressing their [START] key (

) after leaving their voice message.

● You can connect an extension phone to the machine to make and receive calls like any other extension phone on 

your line. Even if you pick up the extension phone and hear a fax tone, the machine will automatically cut in and 
take over the line. Note, however, if you also have a PC modem on the same line, you must turn on the Remote 
Reception function, and deactivate the Fax Signal Receive function. See "SETTING UP THE MACHINE FOR 
USE WITH A PC MODEM" (p.36) and "USING THE REMOTE RECEPTION FUNCTION" (p.37).

3

9

12

13

14

16

19

21

23

80

85

86

87

88

91

The Remote Reception function is initially set to "ON".