Read Sharp AL-1566 (serv.man17) Service Manual online
AL-1556/1566 TEST COMMAND, FAX SOFT SWITCH, TROUBLE CODES 10 - 23
48
01
Main scan/sub scan
direction magnification ratio
(COPY MAG.)
direction magnification ratio
(COPY MAG.)
[Function]
Used to adjust the magnification ratio in the main scan (front/rear) direction and sub scan direction.
Enter the adjustment value with [10KEY]. Press [START] key to save the set value and make a copy.
(When the adjustment value is increased by 1, the magnification ratio is increased by 0.1%.)
The adjustment mode can be changed by pressing [
Used to adjust the magnification ratio in the main scan (front/rear) direction and sub scan direction.
Enter the adjustment value with [10KEY]. Press [START] key to save the set value and make a copy.
(When the adjustment value is increased by 1, the magnification ratio is increased by 0.1%.)
The adjustment mode can be changed by pressing [
←
/
→
] key. (Adjustment range: 1 – 99, Default: 50)
[Operation]
The operation is similar to test command 46-01.
The operation is similar to test command 46-01.
05
SPF/RSPF mode sub scan
direction magnification ratio
in copying (SPF/RSPF
MAG.)
direction magnification ratio
in copying (SPF/RSPF
MAG.)
[Function]
Used to display the current SPF/RSPF mode sub scan direction magnification ratio on the LCD.
When [START] key is pressed, the entered data is acquired and saved into the EEPROM, and a copy
is made. (When the set value is increased by 1, the magnification ratio is increased by 0.1%.)
(Adjustment range: 1 – 99, Default: 50)
Used to display the current SPF/RSPF mode sub scan direction magnification ratio on the LCD.
When [START] key is pressed, the entered data is acquired and saved into the EEPROM, and a copy
is made. (When the set value is increased by 1, the magnification ratio is increased by 0.1%.)
(Adjustment range: 1 – 99, Default: 50)
When adjusting the RSPF, use [2-SIDED COPY] key to select single/duplex after entering the one
page print mode, performing 2-page single copy.
page print mode, performing 2-page single copy.
For printing, regardless of the density mode and the density level,
Density mode = MANUAL
Density level = 3
Density level = 3
∗
When there is no document in SPF, copy is inhibited.
*1: Only when RSPF is installed. If installed, skipped.
[Operation]
The operation is similar to test command 46-01.
The operation is similar to test command 46-01.
Main
code
code
Sub
code
Contents
Details of function/operation
Mode
Display item
Default value
LED
Main scan direction magnification ratio
F-R
50
PRINT mode lamp
OC mode sub scan direction
magnification ratio
magnification ratio
SCAN
50
SCAN mode lamp
Mode
Display item
Default
LED
Sub scan magnification ratio adjustment on the
surface of SPF/RSPF document
surface of SPF/RSPF document
SIDE1
50
COPY mode lamp
Sub scan magnification ratio adjustment on the
surface of RSPF document *1
surface of RSPF document *1
SIDE2
50
PRINT mode lamp
Click on the first or last page to see other AL-1566 (serv.man17) service manuals if exist.