Read Sharp AL-1566 (serv.man17) Service Manual online
AL-1556/1566 TEST COMMAND, FAX SOFT SWITCH, TROUBLE CODES 10 - 30
64
01
Self print (1by2 mode)
(SELF PRT.)
(SELF PRT.)
[Function]
The status of the optical section is ignored and printing of one page is made. Also when the print com-
mand is received from the host, printing is made.
The status of the optical section is ignored and printing of one page is made. Also when the print com-
mand is received from the host, printing is made.
When this test command is executed, warm-up is performed and the ready lamp is lighted. (Since,
however, the scanner is disabled, initializing is not made.)
however, the scanner is disabled, initializing is not made.)
Enter the code number and press [OK/START] key to start paper feed from the selected cassette and
print in the selected pattern.
print in the selected pattern.
∗
For 4 – 99, flip.
[Operation]
The operation is similar to test command 21-01.
The operation is similar to test command 21-01.
66
01
FAX soft SW setting
(AL-1566)
(AL-1566)
[Function]
Use to check the FAX soft SW setting.
Every time when the key is pressed, the bit on the first line is switched 0 and 1.
Use to check the FAX soft SW setting.
Every time when the key is pressed, the bit on the first line is switched 0 and 1.
[Operation]
02
FAX soft SW initializing
(excluding the adjustment
values) (AL-1566)
(excluding the adjustment
values) (AL-1566)
[Function]
Use to initializing FAX soft SW.
Use to initializing FAX soft SW.
[Operation]
Main
code
code
Sub
code
Contents
Details of function/operation
Code number
Pattern
Display item
0
1by2
1 BY 2
1
Grid pattern
CHECK
2
White paper
WHITE
3
Black background
BLACK
1) Initial display
∗
[CLEAR] key: FAX control is terminated.
2) Enter a 3-digit value of soft SW No. (To
enter the fourth digit, shift to the left.), and
the press [OK] key.
the press [OK] key.
"xxxxxxxx" is the set content.
∗
Select 2: Returns to the soft SW No. entry dis-
play.
play.
3) Select 1
4) Change with 1-8 of [10KEY] and the press
[OK] key.
"xxxxxxxx" is the set content.
∗
Select 2: Returns to the soft SW No. entry dis-
play.
play.
5) Select 1
After 2sec, returns to "1) Initial display".
ENTER FAX SOFT SW. #
(3 DIGITS) SW.___
No.### xxxxxxxx
CHANGE? 1:YES 2:NO
No.### xxxxxxxx
USE # KEY 12345678
No.### xxxxxxxx
STORED? 1:YES 2:NO
STORED
1) Initial display
After 2sec, FAX control is terminated.
INITIALIZED
Click on the first or last page to see other AL-1566 (serv.man17) service manuals if exist.