Read Sharp AL-1566 (serv.man13) Service Manual online
AL-1556/1566 TEST COMMAND, FAX SOFT SWITCH, TROUBLE CODES 10 - 16
43
05
Fusing temperature setting
in duplex copy (FU TEMP
DPLX)
in duplex copy (FU TEMP
DPLX)
[Function]
In the case of duplex copy, the shift temperature set with this test command is applied to the fusing
temperature.
When this test command is executed, the current set code number is displayed.
Enter the desired code number and press [OK/START] key to save the setting.
In the case of duplex copy, the shift temperature set with this test command is applied to the fusing
temperature.
When this test command is executed, the current set code number is displayed.
Enter the desired code number and press [OK/START] key to save the setting.
[Operation]
The operation is similar to test command 21-01.
The operation is similar to test command 21-01.
09
Postcard size paper fusing
control setting (FU CTR P-
CARD) (Japan model only)
control setting (FU CTR P-
CARD) (Japan model only)
[Function]
When this test command is executed, the current set code number is displayed.
When this test command is executed, the current set code number is displayed.
Enter the desired code number and press [OK/START] key to save the setting.
∗
Setting" is default for Japan. However, there is no schedule for production of the Japan model.
[Operation]
The operation is similar to test command 21-01.
The operation is similar to test command 21-01.
11
Postcard size paper fusing
temperature setting (FU
TEMP P-CARD) (Japan
model only)
temperature setting (FU
TEMP P-CARD) (Japan
model only)
[Function]
When this test command is executed, the current set code number is displayed.
When this test command is executed, the current set code number is displayed.
When [
←
/
→
/10KEY] key is pressed, setting is changed. When [OK/START] key is pressed, setting is
written into the EEPROM. The machine goes into the sub code entry standby mode.
∗
Applied only to the Japan model. However, there is no schedule to produce the Japan model. Set-
ting is reflected only when ON with test command 43-09.
ting is reflected only when ON with test command 43-09.
[Operation]
The operation is similar to test command 21-01.
The operation is similar to test command 21-01.
14
Fusing start temperature
setting (FU TEMP START)
setting (FU TEMP START)
[Function]
When this test command is started, the currently set code number is displayed.
Press [
When this test command is started, the currently set code number is displayed.
Press [
←
/
→
/10KEY] to switch the setting, and press [OK/START] key to save it to the EEPROM. The
machine goes to the sub code entry standby mode.
[Operation]
The operation is similar to test command 21-01.
The operation is similar to test command 21-01.
Main
code
code
Sub
code
Contents
Details of function/operation
Code
Shift temperature (°C)
Remark
0
±0
Default
1
-8
2
-6
3
-4
4
-2
5
±0
6
+2
7
+4
8
+6
9
+8
Code
Shift temperature (°C)
Display item
Remark
0
Cancel
OFF
Default
1
Setting
ON
Code
Shift temperature (°C)
Remark
0
160
1
165
2
170
3
175
4
180
5
185
6
190
7
195
Default
8
200
Code
Set temperature (°C)
Remark
0
160
1
165
2
170
3
175
4
180
5
185
6
190
7
195
Default
8
200
Click on the first or last page to see other AL-1566 (serv.man13) service manuals if exist.