PN-Y325 - Sharp Monitor Service Manual (repair manual). Page 20

PN-Y325/Y425/Y475/Y555 INSTALLATION, ADJUSTMENT, SETTING    2 - 4 

 

 

Type 

Name 

Description 

Display input/output terminal 

HDMI input terminal 

 

     

 

• Use a commercially available HDMI cable (conforming to the 

HDMI standard). 

• Set HDMI of INPUT SELECT on the SETUP menu according to 

the device to be connected. 

DVI-D input terminal 

 

• Use a commercially available signal cable (DVI-D 24 pin). 

DVI-D out terminal 

 

• When the input mode is set to DVI-D, the video of the DVI-D 

input can be output to an external device. 

• Outputting HDCP-encrypted video requires an external device 

which supports HDCP. 

• This terminal allows the daisy chain connection of up to 5 

monitors by connecting the monitors to each other through the 

DVI-D input terminal of each monitor. 

D-sub input terminal 

 

     

 

• To use with D-SUB[VIDEO], connect the green terminal to the 

device’s video output. 

• Select the audio input terminal to be used in AUDIO SELECT of 

the SETUP menu. 

USB terminal 

 

 

• Use the main firmware update. 
• Connect a USB flash drive to the USB port. 
• Do not connect a USB device other than a USB flash drive. 
• Turn off the power of the monitor when removing a USB flash 
drive. 
• Do not use a USB extension cable. 
• Use a USB flash drive with a maximum capacity of up to 32 GB.
• Do not use a USB flash drive with a security function. 
• Use a USB flash drive with a shape that can be inserted in the 
USB port. Some USB flash drives with special shapes cannot be 
inserted. 

Audio input/output 

terminal 

Audio1 input terminal 

 

• Use an audio cable without resistance.

 

Audio2 input terminal 

 

• Use an audio cable (RCA) without resistance.

 

Audio output terminal 

 

• The output sound varies depending on the input mode. 
• It is not possible to control the sound output from the 
audio output terminals with the AUDIO menu. 

Other 

RS-232C input terminal 

 

• You can control the monitor from a PC by connecting a 
commercially available RS-232 straight cable between 
these terminals and the PC. 
• PN-Y325 monitors can be connected together in a daisy 
chain connection. 

RS-232C output terminal 

 

LAN terminal 

 

• You can control the monitor from a PC on a network by 
connecting a commercially available LAN cable between 
this terminal and a network.