Read Sharp PN-L802B Handy Guide online
PN-L802B Installation Guidelines <Rev1.0> February 2012
CONFIDENTIAL
Treatment of USB cable
Connection with USB cable
12
Connection to touch panel
To use touch panel, it is necessary to connect USB cable to a
computer and install the touch panel driver.
computer and install the touch panel driver.
1. Boot a computer.
2. Connect the display and the computer by USB cable.
When the cable is connected, this display will be
recognized automatically
3. Install the touch panel driver from accompanying CD-ROM
* Regarding installation of the touch panel driver, please refer to
the its user instruction.
Please fasten USB cable with attached cable clamps.
1. Make double circle with a diameter of about 4 cm at the
15cm point from a mini USB connector.
2. Attach a cable clamp on the fixed area next to USB port.
3. Fasten USB cable with circled cable clamp.
※
This is a image looked from underside of
this product
At the first installation,
please execute 25 points
calibration with touch pen.
please execute 25 points
calibration with touch pen.
To USB port
of computer
of computer
USB cable
USB cable (accessories)
Click on the first or last page to see other PN-L802B service manuals if exist.