Read Sharp PN-L802B (serv.man10) User Guide / Operation Manual online
20
E
Acquiring an Image From a Multifunction Machine
If a SHARP multifunction machine is connected to the same network as the computer on which the Pen Software is installed, an
image scanned on the multifunction machine can be acquired onto the whiteboard.
TIPS
• Supports the Network Scanner Tool 3.3 or higher (as of December 2011).
• For details, contact your dealer or nearest authorized service representative for the multifunction machine.
• For the procedures for using the multifunction machine, see the manual for the multifunction machine.
Using the Network Scanner Tool to acquire an image
The first time you use the Network Scanner Tool, install the Network Scanner Tool on the computer on which the Pen Software
has been installed and configure the Network Scanner Tool settings. (Page 26)
To acquire an image from a multifunction machine, the Network Scanner Tool must be running on your computer.
Use JPEG for the scan send format.
n
In the multifunction machine
1. Place the document in the multifunction machine.
2. Select a destination stored in the Network Scanner Tool.
3. Select JPEG for the scan send format.
4. Execute scanning.
2. Select a destination stored in the Network Scanner Tool.
3. Select JPEG for the scan send format.
4. Execute scanning.
The document will be scanned and sent to the Pen Software.
n
In the Pen Software (whiteboard mode)
When the image has been sent, the
“Receive the printed or scanned images” button will blink.
5. Touch the
“Receive the printed or scanned images” button.
The first sheet of the acquired image appears.
Click on the first or last page to see other PN-L802B (serv.man10) service manuals if exist.