PN-L702B (serv.man7) - Sharp Monitor Service Manual (repair manual). Page 127

PN-L702B　DISASSEMBLY AND ASSEMBLY

 6 – 14

1 ) Remove four screws A (M3 x 6, Silver), remove four screws B ((M3 x 10B, Silver), and remove the speaker cover.

n

Be careful not to pinch the speaker cable.

n

Screw A: 0.7 - 0.9N•m

n

Screw B: 0.55 - 0.65N•m

2 ) Remove two Faston terminals and two screws (M3 x 6 SW+W, Silver), remove two plain washers, and remove the speakers L/R. 

n

The speakers L/R have an engraved mark for identification. Do not install it in the opposite direction.

n

Insert the Faston terminals securely to the bottom to fix firmly.

n

0.7 - 0.9N•m

Band

A

Screw

x 4

B

Screw

x 4

Speaker
cover

Speaker cable

When assembling, put the binding band of the 
speaker cable inside the cover. 
Slightly pull the speaker cable until it is 
stopped by the binding band inside the cover. 

L-ch

R-ch

Speaker L

Speaker R

Screw x 2
Washer x 2

Screw x 2
Washer x 2

Mark

Mark

Faston terminal

Red

Black

Pull it out while 
holding down the 
part below.