Read Sharp PN-L603A (serv.man3) Service Manual online
PN-L703A/L703B, PN-70TA3/70TB3, PN-L603A/L603B, PN-60TA3/60TB3
INSTALLATION, ADJUSTMENT, SETTING 2 - 3
■
Connection with a PC or AV equipment
Signal type
Name
Contents
Video input/output
HDMI 1 input terminal
- Use a commercially available HDMI cable (conforming to the
HDMI standard).
- Set HDMI1/HDMI2/HDMI3 of INPUT SELECT on the SETUP
menu according to the device to be connected.
- Select the audio input terminal to be used in AUDIO SELECT of
the SETUP menu.
When HDMI is selected, connection to the audio input terminal is
unnecessary.
HDMI 2 input terminal
HDMI 3 input terminal
DisplayPort input terminal
HDMI 3 input terminal
DisplayPort input terminal
- Use a commercially available DisplayPort cable (conforming to
the DisplayPort standard).
- Select the audio input terminal to be used in AUDIO SELECT of
the SETUP menu.
When DisplayPort is selected, connection to the audio input
terminal is unnecessary.
When DisplayPort is selected, connection to the audio input
terminal is unnecessary.
D-sub 1 input terminal
- Set D-SUB1 of INPUT SELECT on the SETUP menu according
to the device to be connected.
- To use with D-SUB1[VIDEO], connect the green terminal to the
device’s video output.
- Select the audio input terminal to be used in AUDIO SELECT of
the SETUP menu.
D-sub 2 input terminal
- Select the audio input terminal to be used in AUDIO SELECT of
the SETUP menu.
Audio input/output
Audio 1 input terminal
- Use an audio cable without resistance.
- Set the audio input terminal to be used in each input mode in
- Set the audio input terminal to be used in each input mode in
AUDIO SELECT on the SETUP menu.
Audio 2 input terminal
DisplayPort output terminal
- The screen displayed on the monitor and the audio output from
the monitor can be output to an external device.
- Use a commercially available DisplayPort cable (conforming to
the DisplayPort standard).
- Outputting HDCP-encrypted video requires an external device
which supports HDCP.
Audio output terminal
- The output sound varies depending on the input mode.
- The volume of the output sound can be fixed by setting AUDIO
- The volume of the output sound can be fixed by setting AUDIO
OUTPUT of AUDIO OPTION on the SETUP menu.
- It is not possible to control the sound output from the audio output
terminals with the AUDIO menu.
External speaker terminals
- To use external speakers, set SPEAKER SELECT to EXTERNAL
in AUDIO OPTION on the SETUP menu.
- Be sure to use external speakers with an impedance of 6 Ω or
greater and a rated input of at least 10 W.
Click on the first or last page to see other PN-L603A (serv.man3) service manuals if exist.