Read Sharp PN-L603A (serv.man3) Service Manual online
PN-L703A/L703B, PN-70TA3/70TB3, PN-L603A/L603B, PN-60TA3/60TB3
INSTALLATION, ADJUSTMENT, SETTING 2 - 1
Chapter 2 INSTALLATION, ADJUSTMENT, SETTING
1. INSTALLATION
1 – 1.INSTALLAING PRECAUTIONS
• This product is for use indoors.
• A mounting bracket compliant with VESA specifications is
• A mounting bracket compliant with VESA specifications is
required.
• Since the monitor is heavy, consult your dealer before
installing, removing or moving the monitor.
• Mounting the monitor on the wall requires special expertise
and the work must be performed by an authorized SHARP
dealer. You should never attempt to perform any of this
work yourself. Our company will bear no responsibility
for accidents or injuries caused by improper mounting or
mishandling.
• Use the monitor with the surface perpendicular to a level
surface. If necessary, the monitor may be tilted up to 20
degrees upward.
• When moving the monitor, be sure to hold it with the
handles and the unit bottom. Do not grasp the screen or
tray. This may cause product damage, failure, or injury.
• This monitor should be used at an ambient temperature
between 41°F (5°C) and 95°F (35°C). Provide enough
space around the monitor to prevent heat from
accumulating inside.
•
If it is difficult to provide sufficient space for any reason
such as the installation of the monitor inside a housing, or
if the ambient temperature may be outside of the range
of 41°F (5°C) to 95°F (35°C), install a fan or take other
measures to keep the ambient temperature within the
required range.
•
Temperature condition may change when using the monitor
together with the optional equipments recommended by
SHARP. In such cases, please check the temperature
condition specified by the optional equipments.
•
Do not block any ventilation openings. If the temperature inside
the monitor rises, this could lead to a malfunction.
•
Do not place the monitor on a device which generates heat.
•
Do not use the product in locations where the unit is exposed
to direct sunlight or other strong light. Since this
product operates with infrared rays, such light may cause a
malfunction.
1 – 2.MOUNTING PRECAUTIONS
•
When installing, removing or moving the monitor, ensure that
this is carried out by at least 4 people.
•
Be sure to use a wall-mount bracket designed or designated for
mounting the monitor.
•
This monitor is designed to be installed on a concrete wall or
pillar. Reinforced work might be necessary for some materials
such as plaster / thin plastic board / wood before starting
installation.
This monitor and bracket must be installed on a wall which can
endure at least 4 times or more the weight of the monitor.
Install by the most suitable method for the material and the
structure.
•
To attach a VESA-compliant mounting bracket, use M6 screws
that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the
thickness of the mounting bracket.
•
Do not use an impact driver.
•
After mounting, please carefully ensure the monitor is secure,
and not able to come loose from the wall or mount.
•
Do not use any screw holes other than VESA holes for
installation.
Click on the first or last page to see other PN-L603A (serv.man3) service manuals if exist.