Read Sharp PN-L603A (serv.man2) Handy Guide online
Michigan 2 Installation Guidelines <Rev1.0> February 2014
CONFIDENTIAL
19
Connection of Touch pen adapter
In order to use the touch pen bundled in A series models (PN-
L703A/L603A/70TA3/60TA3), it is necessary to attach the
Touch Pen Adapter with the display.
Touch panel connection
In order to use the touch panel, it is necessary to connect the
display with computer by using USB cable.
1) Boot the computer.
2) Finish all application software.
3) Connect the USB cable with the computer.
1) Boot the computer.
2) Finish all application software.
3) Connect the USB cable with the computer.
* Display will be recognized automatically when the cable is
connected.
If you use the touch panel function with the computer
connected to bottom I/F, please use USB port 1.
If you use the touch panel function with the computer
If you use the touch panel function with the computer
connected to side I/F, please use USB port 2.
(Above setting is the factory default setting, which can be
changed from the setting menu)
* For the installation of touch panel setting utility, please refer
to its operation manual.
Touch pen bundled in A series models can be used for B series
models (PN-L703B/L603B/70TB3/60TB3) as well, by purchasing it
as option (PN-ZL01).
* Please install touch pen utility. For the installation, please refer
to its operation manual.
Other precautions 1
To the USB port
of computer
USB cable
USB Port 1
USB Port 2
I/F for
Touch Pen
Adapter
Touch Pen
Adapter
Fixing screw
for Touch Pen
Adapter
(For theft
prevention)
Click on the first or last page to see other PN-L603A (serv.man2) service manuals if exist.