Read Sharp PN-L603A (serv.man2) Handy Guide online
Michigan 2 Installation Guidelines <Rev1.0> February 2014
CONFIDENTIAL
18
* Please mount the displays onto the mounting brackets recommended by SHARP.
Back of the display
VESA compliant screw holes
Precautions for display mounting
-Please pay attention to the following items when using screw holes on the back of IDP.
1) Please use at least 4 mounting screws to fix the display.
2) The diameter of screw hole for the mounting bracket should be less than or equal to 7.5mm.
2) The diameter of screw hole for the mounting bracket should be less than or equal to 7.5mm.
Display may drop due to oversized hole.
3) Please use screws with correct length as described in the operation manual of the display.
Display may drop due to over length of the screws.
4) Please take proper countermeasures to prevent the screws from becoming loose (For example : using screws with washer).
5) Please tighten screws hard within 3N*m strength (Tightening torque: 3N*m ).
5) Please tighten screws hard within 3N*m strength (Tightening torque: 3N*m ).
VESA compliant mounting bracket for the display (M6 screw)
Hole diameter for mounting bracket
(less than or equal to 7.5mm)
(less than or equal to 7.5mm)
Screw (M6)
Mounting bracket
Rear cover of display
Captive nut for
fixing
Length of screw 8-10 mm
Click on the first or last page to see other PN-L603A (serv.man2) service manuals if exist.