PN-K322BH (serv.man6) - Sharp Monitor User Guide / Operation Manual. Page 7

7

E

•  This product is for use indoors.
•  A mounting bracket compliant with VESA specifications is 

required. 

•  To install on a stand (commercially available) or on a wall, 

or to remove or move the monitor, consult your dealer.

•  Mounting the monitor on the wall requires special expertise 

and the work must be performed by an authorized SHARP 
dealer. You should never attempt to perform any of this 
work yourself. Our company will bear no responsibility 
for accidents or injuries caused by improper mounting or 
mishandling.

•  Use the monitor with the surface perpendicular to a level 

surface. If you are tilting the monitor without using the 
supplied stand, the monitor may be tilted up to 25 degrees 
upward or 20 degrees downward.

•  This monitor should be used at an ambient temperature 

between 41°F (5°C) and 95°F (35°C). Provide enough 
space around the monitor to prevent heat from 
accumulating inside.

2

[5]

2

[5]

2 [5]

7-7/8 [20]

2

[5]

2

[5]

1/8 [3.5]

1/8 [3.5]

2

[5]

2

[5]

27-19/64 

[69.3]

Unit: inch [cm]

7-7/8 [20]

2 [5]

Unit: inch [cm]

Unit: inch [cm]

•  If it is difficult to provide sufficient space for any reason 

such as the installation of the monitor inside a housing, or 
if the ambient temperature may be outside of the range 
of 41°F (5°C) to 95°F (35°C), install a fan or take other 
measures to keep the ambient temperature within the 
required range.

•  Do not block any ventilation openings. If the temperature 

inside the monitor rises, this could lead to a malfunction.

•  Do not place the monitor on a device which generates heat.

•  When installing the 

monitor in landscape 
orientation, you can attach 
the supplied horizontal 
sticker (operation buttons) 
to the front.

•  Use the supplied vertical sticker when you install the 

monitor in portrait orientation.

Attach the vertical sticker (Operation buttons) to 

the back or the front.

Vertical sticker (Operation buttons)

Vertical sticker (Logo)

Cover 

Sharp logo

Vertical sticker (Blank)

Vertical sticker (Operation buttons)

Caution

•  Adhere to the following when installing the monitor in its 

portrait orientation. Failing to adhere to the following may 

cause malfunctions.

  -  Install the monitor such that the operation buttons are 

located on the top side.

  -  Set the MONITOR on the MONITOR menu to PORTRAIT. 

(See page 23.)

Horizontal sticker 

(Operation 

buttons)