Read Sharp PN-G655E (serv.man3) Service Manual online
PN-G655E
CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTION
2 – 2
(3) Other terminals
[PC/AV audio output terminals]
• Audio from the equipment connected to the AV audio input terminals
or PC audio input terminal is output. Connect to the audio input termi-
nals of the connected equipment using a commercially available
nals of the connected equipment using a commercially available
audio cable (RCA).
• The audio output varies depending on the input mode selection.
• The volume level can be adjusted using the volume adjustment.
• Selecting FIXED of “AUDIO OUTPUT” from the OPTION menu fixes
the volume of sound output from the audio output terminals.
• Audio signals output from the PC/AV audio output terminals cannot
be adjusted using the AUDIO menu.
[PC/AV output terminals]
Video signals from PC1 and AV1 can be output to HDCP-compatible
external device. Use this terminal when you connect multiple moni-
external device. Use this terminal when you connect multiple moni-
tors in a daisy chain via DVI cable (commercially available).
Images cannot be output to device that is not HDCP-compatible.
[RS-232C input/output terminals]
You can control the monitor from a PC by connecting a commercially
available RS-232C straight cable between this terminal and the PC.
1-2. CONNECTING EXTERNAL SPEAKERS
Be sure to use external speakers with an impedance of 6
Ω and a rated
input of at least 7W.
1) While pushing the tab, insert the tip of the cable.
2) Release the tab.
Note:
• Be sure to connect the
+
and
−
terminals and the left and right
speakers properly.
• Avoid short circuiting the
+
and
−
terminals.
1-3. CONNECTING MULTIPLE MONITORS
You can connect multiple monitors (up to 5 monitors) in a daisy chain by
using the PC1/AV1 input terminals and PC/AV output terminals of this
monitor.
monitor.
[Connection example]
Note:
• The length of the signal cables or surrounding environment may
affect the image quality.
• The screen may not display properly when using terminals other
than PC1/AV1 for the input mode. In this case, turn off the power to
all the monitors connected in a daisy chain and then turn the power
on again.
on again.
1
2
First monitor
Second monitor
PC/AV output
terminal
terminal
PC1/AV1 input terminals
Digital signal (DVI) cables
(commercially available)
(commercially available)
To PC digital RGB output terminal
shows the signal flow
Click on the first or last page to see other PN-G655E (serv.man3) service manuals if exist.