Read Sharp PN-E602 (serv.man3) Service Manual online
PN-E702/E602 OUTLINE OF THE PRODUCT
1 – 1
CHAPTER 1. OUTLINE OF THE PRODUCT
1. SPECIFICATIONS
1 - 1. OUTLINE
*
1
Cannot be used simultaneously.
*
2
Does not support plug and play.
*
3
Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP.
In such cases, please check the temperature condition specified by the optional equipments.
*
4
When “AUTO INPUT CHANGE” is set to “OFF”.
*
5
When “STANDBY MODE” is set to “STANDARD”. When “STANDBY MODE” is set to “LOW POWER”: 0.5W
Model
PN-E702
PN-E602
LCD component
70” Class [69-1/2 inch (176.6cm) diago-
nal] TFT LCD
60” Class [60-1/16 inch (152.5cm) diago-
nal] TFT LCD
Max. resolution (pixels)
1920 x 1080
Max. colors
Approx. 1.06 billion colors
Pixel pitch
0.802 mm (H) x 0.802 mm (V)
0.692 mm (H) x 0.692 mm (V)
Viewing angle
176° right/left/up/down (contrast ratio>10)
Screen active area inch (mm)
60-9/16 x 34-1/16 (1538.9 x 865.6)
52-5/16 x 29-7/16 (1329.1 x 747.6)
Computer input signal
n
Digital (DVI 1.0 standard-compliant)
n
Analog RGB (0.7 Vp-p) [75
Ω]
Sync signal
n
Horizontal/vertical separate (TTL: positive/negative)
n
Sync-on-green
n
Composite sync (TTL: positive/negative)
Video color system
NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM
Plug and play
VESA DDC2B
Power management
n
VESA DPMS
n
DVI DMPM
Input terminals
PC/AV
Digital
HDMI x 1
PC
Analog
Mini D-SUB 15 pin, 3 rows x 1
Audio
3.5 mm mini stereo jack x 1
Serial (RS-232C)
D-SUB 9 pin x 1
When PN-ZB01
(optional) is attached
PC/AV
Digital
DVI-D 24 pin (HDCP compatible) x 1
PC
Analog
BNC
*1*2
x 1
AV
Composite video
BNC x 1
S-video
x 1
Component
BNC (Y, Cb/Pb, Cr/Pr)
*1
x 1
Audio
RCA pin (L/R) x 2
Output terminals
Audio
RCA pin (L/R) x 1
Serial (RS-232C)
D-SUB 9 pin x 1
When PN-ZB01
(optional) is attached
PC/AV
Digital
DVI-D 24 pin x 1
External speaker
7 W + 7 W [6
Ω]
LAN terminal [When PN-ZB01 (optional) is attached]
10 BASE-T/100 BASE-TX
Speaker output
7 W + 7 W
Power requirement
AC100 V - 240 V, 2.8 A, 50/60 Hz
AC100 V - 240 V, 2.0 A, 50/60 Hz
Operating temperature
*3
32°F to 104°F (0°C to 40°C)
Operating humidity
20% to 80% (no condensation)
Power consumption (maximum/input signal waiting
mode
mode
*4
/standby mode
*5
)
235 W/1.0 W/1.0 W
165 W/1.0 W/1.0 W
When PN-ZB01 (optional) is attached
240 W
170 W
Dimensions (excluding protrusions) inch (mm)
Approx. 63-9/16 (W) x 3-15/16 (D) x
37-5/16 (H) (1,615 x 100 x 947)
37-5/16 (H) (1,615 x 100 x 947)
Approx. 55-3/8 (W) x 3-3/8 (D) x
32-3/16 (H) (1,407 x 86 x 817)
32-3/16 (H) (1,407 x 86 x 817)
Weight lbs. (kg)
Approx. 110.2 (50)
Approx. 83.8 (38)
PN-ZB01 (optional)
Approx. 1.102 (0.5)
Click on the first or last page to see other PN-E602 (serv.man3) service manuals if exist.