PN-A601 (serv.man3) - Sharp Monitor Service Manual (repair manual). Page 6

PN-A601　OUTLINE OF THE PRODUCT

 1 – 2

*

1

Cannot be used simultaneously.

*

2

Does not support plug and play.

*

3

Temperature condition may change when using the display together with the optional equipments recommended by SHARP.
In such cases, please check the temperature condition specified by the optional equipments.

*

4

When “AUTO INPUT CHANGE” is set to “OFF”.

*

5

When “STANDBY MODE” is set to “STANDARD”. When “STANDBY MODE” is set to “LOW POWER”: 0.5 W.

■ PN-A601

When mounting the monitor, be sure to use a wall-mount bracket that complies with the VESA-compatible mounting method.
SHARP recommends using M6 screws and tighten the screws.

Note that screw hole depth of the monitor is 3/8 inch (10 mm). Loose mounting may cause the product to fall, resulting in serious personal injuries as

well as damage to the product. The screw and hole should come together with over 5/16 inch (8 mm) length of thread. Use a bracket which has been
approved for UL1678 standard, and which can endure at least 4 times or more the weight of the monitor.

■ PN-ZR01

2-7/8
[73]

5-13/16
[147]

3-

9

/16 [

9

0]

54-1/8 [1374]

Opening width (52-1/2 [1334])

31-1/4 [7

9

3]

52-3/8 [1331]

49-1/8 [1247]

Opening height 

(2

9

-5/8 [753])

7-7/8
[200]

7-7/8
[200]

3-15/16
[100]

3-15/16
[100]

7-7/8 [200]

VESA holes 

*1

Unit: inch [mm]

3

3

42

34

34.2

38.8

18.8

2

9

.71

19

11

130

6

34.4

29

1.4

46.4

31

Remote control
sens

(Unit: mm)