Read Sharp LC-60LE651K (serv.man14) Technical Bulletin online
LCD 2013 07 01
Date of Issue:
12
th
July 2013
Classification:
White
LCD TELEVISION TECHNICAL BULLETIN
Page 1 of 4
Sharp Electronics (UK) Limited
Reference
– RG12072013-1
Revision - 2
White
– Carry out as required
Yellow
– Carry out as required and whenever the unit comes in for service
Red
– Carry out on all units
MODELS
LC39LE651K
LC50LE751K
LC50LE651K
LC60LE751K
LC60LE651K
LC39LE751K
REASON
USB and Internet firmware update procedure.
ACTION
The following information describes how to update the televisions firmware.
If you experience any issues during the firmware update process or if you have any
questions, please contact the Aquos Helpdesk on
If you experience any issues during the firmware update process or if you have any
questions, please contact the Aquos Helpdesk on
0870 787 4837
Check your current Software Version
1. Press the MENU button on your remote control.
2. Using the
1. Press the MENU button on your remote control.
2. Using the
◄/►, ▲/▼ and the OK button, select “EXTRAS”, “SPECIAL
FUNCTIONS
”, “INTERGRATED FEATURES“.
3. You can check and confirm the current Software Version.
4.
4.
Press the “END” button on your remote to exit the menu.
LCD 2013 07 01
Date of Issue:
12
th
July 2013
Classification:
White
LCD TELEVISION TECHNICAL BULLETIN
Page 2 of 4
Sharp Electronics (UK) Limited
Reference
– RG12072013-1
Revision - 2
White
– Carry out as required
Yellow
– Carry out as required and whenever the unit comes in for service
Red
– Carry out on all units
NOTE
– The USB update process will take approximately 10 minutes to
complete.
USB update Procedure
1. Download the firmware from the link provided or from the Technical Website.
2. Extract (Unzip) the downloaded file.
3.
2. Extract (Unzip) the downloaded file.
3.
Copy the extracted file “le65x_release_all_pck.tli” into the root directory of a USB
memory stick.
memory stick.
Note - Ensure there are no other files such as movies, pictures, songs, etc. on the
USB memory stick.
USB memory stick.
4. Switch on the television and wait 10 seconds after a picture appears.
5. Insert the USB memory stick into the USB side terminal (Either USB port on the left
5. Insert the USB memory stick into the USB side terminal (Either USB port on the left
side) of the television and wait 20 seconds before proceeding to step 6.
6. Press the MENU button on your remote control.
7.
Using the ◄/►, ▲/▼ and the OK button, select “EXTRAS”, “SOFTWARE”,
“SOFTWARE UPDATE”, VIA USB” then follow the on-screen instructions
“SOFTWARE UPDATE”, VIA USB” then follow the on-screen instructions
.
8. When the firmware update is complete, you will see the following screen:
9. Unplug the television from the mains power for 10 seconds and remove the USB
memory stick. Plug the television into the mains power.
Note
– At this point the firmware is loaded into the flash memory.
LCD 2013 07 01
Date of Issue:
12
th
July 2013
Classification:
White
LCD TELEVISION TECHNICAL BULLETIN
Page 3 of 4
Sharp Electronics (UK) Limited
Reference
– RG12072013-1
Revision - 2
White
– Carry out as required
Yellow
– Carry out as required and whenever the unit comes in for service
Red
– Carry out on all units
USB update Procedure
….cont
10.
When the television turns on, wait for 30 seconds after the “SHARP” logo appears
and then unplug the television from the mains power.
and then unplug the television from the mains power.
Note
– At this point the firmware is loaded into the EEPROM.
11. Plug the television into the mains and wait 10 seconds after the input signal
appears (DTV, HDMI, PC, etc.).
12.
Reset the settings and repeat the initial installation:
a. Press the MENU button on your remote control.
b.
b.
Using the ◄/►, ▲/▼ and the OK button, select
“EXTRAS”, “SPECIAL
FUNCTIONS”, “RESET TO FACTORY SETTINGS”.
c.
Follow the on-screen instructions and repeat the initial installation.
13.
The update is now complete. If you experience any failures during the process,
repeat the update process from step 1.
repeat the update process from step 1.
LCD 2013 07 01
Date of Issue:
12
th
July 2013
Classification:
White
LCD TELEVISION TECHNICAL BULLETIN
Page 4 of 4
Sharp Electronics (UK) Limited
Reference
– RG12072013-1
Revision - 2
White
– Carry out as required
Yellow
– Carry out as required and whenever the unit comes in for service
Red
– Carry out on all units
NOTE
– The Internet update process will take approximately 20 to 50 minutes to
complete dependent on your broadband connection speed.
Internet update Procedure
1. Switch on the television and wait 10 seconds after a picture appears.
2. Press the MENU button on your remote control.
3.
Using the ◄/►, ▲/▼ and the OK button, select “EXTRAS”, “SOFTWARE”,
“SOFTWARE UPDATE”, VIA INTERNET” then follow the on-screen instructions.
“SOFTWARE UPDATE”, VIA INTERNET” then follow the on-screen instructions.
4. When the firmware update is complete, you will see the following screen:
5. Unplug the television from the mains power for 10 seconds. Plug the television into
the mains power.
Note
– At this point the firmware is loaded into the flash memory.
6.
When the television turns on, wait for 30 seconds after the “SHARP” logo appears
and then unplug the television from the mains power.
and then unplug the television from the mains power.
Note
– At this point the firmware is loaded into the EEPROM.
7. Plug the television into the mains and wait 10 seconds after the input signal
appears (DTV, HDMI, PC, etc.).
8.
Reset the settings and repeat the initial installation:
d. Press the MENU button on your remote control.
e.
e.
Using the ◄/►, ▲/▼ and the OK button, select
“EXTRAS”, “SPECIAL
FUNCTIONS”, “RESET TO FACTORY SETTINGS”.
f.
Follow the on-screen instructions and repeat the initial installation.
9. The update is now complete. If you experience any failures during the process,
repeat the update process from step 1.
