Read Sharp PN-70TA3 (serv.man9) User Guide / Operation Manual online
6
E
Connections
Caution
• Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/disconnecting
cables. Also, read the manual of the equipment to be connected.
• Be careful not to confuse the input terminal with the output terminal when connecting cables. Accidentally reversing cables
connected to the input and output terminals may cause malfunctions and the other problems.
TIPS
• Set the audio input terminal to be used in each input mode in AUDIO SELECT on the SETUP menu. The factory settings are
shown below.
Input mode
Audio input terminal (Factory setting)
D-SUB1
Audio1 input terminal
D-SUB2
Audio2 input terminal
DisplayPort
DisplayPort input terminal
HDMI1
HDMI 1 input terminal
HDMI2
HDMI 2 input terminal
HDMI3
HDMI 3 input terminal
WHITEBOARD
WHITEBOARD
• To use the touch panel with a computer connected to the monitor, the touch panel and computer must be connected, and
Touch Panel Settings Tool, Touch Pen Utility, and Pen Software must be installed on the computer from the provided CD-
ROM.
To install the software, see the manual for each.
• To use a touch panel with a computer connected to the bottom, connect to the USB 1 port.
To use a touch panel with a computer connected to the side, connect to the USB 2 port.
(Factory setting. Can be changed in TOUCH INPUT SELECT in the SETUP menu.)
• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks
of HDMI Licensing LLC in the United States and other countries.
• DisplayPort is a registered trademark of Video Electronics Standards Association.
1
2
For power outlet
3
4
5
6
7 8
9
11
10
12
18
19
13
14
15
16
17
17
1. AC input terminal
2. Power cord (Supplied)
3. External speaker terminals
4. Audio output terminal
5. DisplayPort output terminal
6. Touch pen adapter port
7. USB 1 port
8. LAN terminal
9. D-sub 1 input terminal
10. DisplayPort input terminal
11. HDMI 1 input terminal
12. Audio 1 input terminal
13. USB 2 port
14. D-sub 2 input terminal
15. HDMI 2 input terminal
16. HDMI 3 input terminal
17. Audio 2 input terminal
WHITEBOARD mode terminals
18. USB ports
19. LAN terminal
Click on the first or last page to see other PN-70TA3 (serv.man9) service manuals if exist.