Read Sharp PN-70TA3 (serv.man4) Handy Guide online
Michigan 2 Installation Guidelines <Rev1.0> February 2014
CONFIDENTIAL
9
Precautions on stand installation
Fix 2 stand mount brackets onto the back of the
display by using 4 screws (M6 x 14)
* As shown above, opened carton box and inner
* As shown above, opened carton box and inner
packing material can support the display.
Please observe the display carefully so that it will
not fall down.
Screws (M6 x 14)
Stand mount bracket
After locking the wheels of the stand, lift up the
display (refer to Page 5), bring it close to the
mounting points carefully and place it onto the
bar.
* Display should be held upright, as it will become
* Display should be held upright, as it will become
difficult to work when the display is tilted.
Hook the display onto the floor stand and fix them
by using 4 screws (M3 x 10).
* Please take care not to jam the fingers / cables
* Please take care not to jam the fingers / cables
Precautions on stand installation (SHARP stand) 3
As this product is heavy, please wear gloves and safety shoes when lifting up this display.
4 persons (70”) or 2 persons (60”) are required in order to install the display onto the stand.
Lift up the display by referring to the guidance on Page 5 and fix it with the stand.
* For details, please refer to the installation manual of PN-ZS703.
4 persons (70”) or 2 persons (60”) are required in order to install the display onto the stand.
Lift up the display by referring to the guidance on Page 5 and fix it with the stand.
* For details, please refer to the installation manual of PN-ZS703.
Click on the first or last page to see other PN-70TA3 (serv.man4) service manuals if exist.