Read Sharp PN-60TA3 (serv.man9) User Guide / Operation Manual online
-
When using the classic mode menu, simultaneous drawing is possible, but the same function, including settings
such as line color and thickness, will be selected on all pens.
-
Multiple boards cannot be used simultaneously, even if displayed in separate windows.
-
When “Automatically Find Eraser” is set, no pens can be used while a drawn line is erased by an eraser or your finger.
-
When multiple touch pens are used, touch positions and touch pen information (color, thickness, etc.) may become
interchanged, and lines may skip.
・
When touched simultaneously
・
When touch pens are moved near each other
・
When batteries are low
・
When other wireless equipment is operating nearby
-
Simultaneous use of multiple touch pens, fingers or erasers may slow down the operation.
-
When the gesture function is enabled, multiple pen inputs may falsely be recognized as a gesture operation.
In that case, please disable the gesture function.
-
Multiple fingers can be used for drawing. In that case, set “Touch Pen” to “Finger or Other Pen” and “Dual-Touch
Gesture” to “Disable” and then set “Simultaneous Drawing with Multiple Fingers” to “Enable”.
-
When using multiple fingers, the function is the same for all fingers.
● Limitations when using multiple pens
● Limitations when using multiple fingers
● Limitations about input at the edge of the screen
-
A stroke or line which runs off the edge of screen may be canceled.
-
When a drawing is started from the corner of the display, the drawing may become locked and erasing is not
possible. In this case, please exit Pen Software after saving whiteboard data, and then restart it again.
4