Read Sharp PN-60TA3 Handy Guide online
3.
Launch “Whiteboard”.
At previous #1 if you press the POWER button ,
“Whiteboard” is launched automatically.
“Whiteboard” is launched automatically.
PN-70TA3/60TA3
Brief Guide
ver1.1
Turn on power and launch “Whiteboard”
1.
Press the POWER button.
2.
Prepare “Touch pen”.
Inserting the battery.
Draw character on “White board”
1
POWER button / Power LED
[Notice]
If main power is turned off,
please turn on this.
If main power is turned off,
please turn on this.
[Notice] Default setting
・Function button 1:Right mouse click
・Function button 2:PageDown
・Function button 3:PageUp
*When the function button is pressed, the battery indicator
illuminates. If the battery indicator does not illuminate,
please check if the battery is depleted.
・Function button 1:Right mouse click
・Function button 2:PageDown
・Function button 3:PageUp
*When the function button is pressed, the battery indicator
illuminates. If the battery indicator does not illuminate,
please check if the battery is depleted.
[Notice]
Even if you touch the launch button in bottom and touch
“Whiteboard”, you can launch.
“Whiteboard”, you can launch.
2.
“Square menu” like following image appears.
3.
Touch “Pen1” icon.
4.
Set on the setting menu like following image.
・Please select the kind of pen
(Standard pen/Brush pen
/Marker/Figure pen), Color
(Black/Red/Blue/Green/Yellow
/White), Size(1~5).
・When you finish setting, please touch “Close” icon.
5.
You can create size and color which you want .
・Touch “Custom” icon ,
Then you can set size and color.
Then you can set size and color.
You can draw character by touching display
(White board area) with pen.
(White board area) with pen.
Bundled pen
1.
Touch the indicator (menu icon) .
●Change size and color of pen
[ Notice]
・You can draw by 4 people at same time.
・You can use max. 100 sheets.
*If you use pensoftware by external PC,
you can use max. 1000 sheets.
*If file is heavy, reading time / moving sheet takes a lot time.
・You can draw by 4 people at same time.
・You can use max. 100 sheets.
*If you use pensoftware by external PC,
you can use max. 1000 sheets.
*If file is heavy, reading time / moving sheet takes a lot time.
Erase character
2
・Touch “Eraser” icon on “Square menu”,
and then you can erase by touching (like
moving softly) the area which you want to
erase.
and then you can erase by touching (like
moving softly) the area which you want to
erase.
・You can erase by moving softly
with bundled eraser.
with bundled eraser.
Bundled eraser
●Change the size of eraser
●Erase all item on sheet
●Erase by bundled eraser
●Erase by bundled pen
1.
Double click “Eraser” icon on “Square menu”.
・If you have already selected “eraser”,
please touch “Eraser” icon again.
2.
Select the size and touch from following 4 images.
1.
Double click “Eraser” icon on “Square menu”.
・If you have already selected “eraser”,
please touch “Eraser” icon again.
2.
Touch “Sheet clear” icon ,
then dialog box appears.
・Once you touch “Yes”, all item is cleared.
・Once you touch “Yes”, all item is cleared.
Add new sheet
Show sheet list of “White board”.
・Touch “Add” icon on “Tool bar” in bottom,
then you can add new sheet.
then you can add new sheet.
・Touch “Sheet list” icon on “Tool bar” in bottom, then you can see thumbnail each sheet.
・If you touch once, you can see up to 8 sheets’ thumbnails at the bottom of screen like following (a) image.
If you touch again, you can see max. 48 sheets’ thumbnails like following (b) image
and you can move to the sheet where you touch.
・If you touch once, you can see up to 8 sheets’ thumbnails at the bottom of screen like following (a) image.
If you touch again, you can see max. 48 sheets’ thumbnails like following (b) image
and you can move to the sheet where you touch.
(a)
(b)
・Touch ”Page” icon ,
then you can move sheet, previous and next.
then you can move sheet, previous and next.
Save the data
1.
Insert USB flash drive.
2.
Touch “Save” icon on “Square menu”.
3.
Select the save method.
・Save as a new file: ・Save to the same file:
・Save PDF: ・Save image:
・Save PDF: ・Save image:
*”Save as a new file” and “Save to the same file”,
it save as SWSX format and you can build again.
*”Save image”, it save as BMP/JPEG/PNG format
so you can not build again.
5.
Touch “OK”.
[Notice]
When you want to change file name, software key board appear
by touching file name space and then you can change it
When you want to change file name, software key board appear
by touching file name space and then you can change it
4.
Select the file save location (USB flash drive)
and touch “OK”.
3
*If you insert USB flash drive to USB I/F of bottom side,
You can not save the data.
You can not save the data.
USB I/F
Open saved data
1.
Touch “Open file” icon
on “Square menu”.
2.
Select file opening method.
・New :
Create a new sheet
・Open as a new file :
Open data as a new file
・Add to the current sheet :
Add data to the current sheet
3.
Read the file.
・Select the saved location (USB flash drive)
and touch “OK”.
and touch “OK”.
4.
Select the file and touch “OK”.
[ Notice]
・You can not save the data into display.
If you want to save the data, please prepare USB
flash drive.
・If you want to use USB flash drive with security,
please use a drive with hardware security. You can not use
a drive with software security since security software
can not be installed into display.
・You can not save the data into display.
If you want to save the data, please prepare USB
flash drive.
・If you want to use USB flash drive with security,
please use a drive with hardware security. You can not use
a drive with software security since security software
can not be installed into display.
[Notice]
Format of “Save as image” is set by “sheet” tab on setting
of “Tool bar” in bottom
Format of “Save as image” is set by “sheet” tab on setting
of “Tool bar” in bottom
Eject a USB flash drive
1.
Touch “Eject USB Media” from launcher menu.
4
2.
Select a USB flash drive.
Select a USB flash drive which
you want to eject, and touch “Stop”.
you want to eject, and touch “Stop”.
Turn off power
[Notice]
Status of Power LED
・Green lit
Status of Power LED
・Green lit
: Power on
・Orange lit
: Power off (Standby mode)
・Orange flashing : Power off (Whiteboard standby mode)
・Green flashing
・Green flashing
: Input signal standby mode
[Notice]
If you want to turn off main power, please turn off main power
after you check whiteboard has
shout down
(after you can see Orange lit).
If you want to turn off main power, please turn off main power
after you check whiteboard has
shout down
(after you can see Orange lit).
1.
Press POWER button in left bottom.
The display will go whiteboard standby mode.
2.
Hold down POWER button in left bottom
until the exit screen appears.
Whiteboard will shutdown.
Whiteboard will shutdown.
Tool bar structure (in bottom)
① “Pin” button: Touch to switch between the pin / do not pin settings.
② Sheet list : Shows the sheets as thumbnails.
③ Settings : Displays the pen software settings screen.
④ Search box : You can search for text and handwritten characters
in the box.
⑤ Sheet navigation buttons:Touch the sheet navigation button
to change the displayed sheet.
② Sheet list : Shows the sheets as thumbnails.
③ Settings : Displays the pen software settings screen.
④ Search box : You can search for text and handwritten characters
in the box.
⑤ Sheet navigation buttons:Touch the sheet navigation button
to change the displayed sheet.
・Pen1~3:Draw lines.
・Eraser:Erase hand-drawn lines.
・Select :Select an object.
You can move/enlarge/rotate
/delete/copy.
・Redo :Redo the immediately preceding
canceled operation.
・View :Enlarge the view of the whiteboard,
change the display position and pages.
・Undo :Cancel the immediately preceding
operation.
・Eraser:Erase hand-drawn lines.
・Select :Select an object.
You can move/enlarge/rotate
/delete/copy.
・Redo :Redo the immediately preceding
canceled operation.
・View :Enlarge the view of the whiteboard,
change the display position and pages.
・Undo :Cancel the immediately preceding
operation.
⑥ Page No. of the current sheet:
⑦ Launch button : Open launcher menu.
⑧ Add sheet button:When the last sheet is displayed,
press to add a sheet at the end.
⑨ Quit : The software is exited.
⑦ Launch button : Open launcher menu.
⑧ Add sheet button:When the last sheet is displayed,
press to add a sheet at the end.
⑨ Quit : The software is exited.
・Drawing Object:Draw a figure or line/arrow.
・Paste:Pastes a copied object.
・Open:Open a file.
・Text :Enter text by software key board.
・Insert image:
:Insert an image file.
:Insert Screen capture.
・Save:Save file.
・All function:Displays all functions in list view.
・Print:Print file. You can select current sheet or all.
・Paste:Pastes a copied object.
・Open:Open a file.
・Text :Enter text by software key board.
・Insert image:
:Insert an image file.
:Insert Screen capture.
・Save:Save file.
・All function:Displays all functions in list view.
・Print:Print file. You can select current sheet or all.
Square menu structure
Launcher menu structure
① ② ③ ④ ⑤ ⑥ ⑦ ⑧
① Whiteboard
Use Whiteboard mode of Pen Software.
② Open File
You can browse PDF and Microsoft Office files, view images,
and play audio/video.
③ Remote Meeting
Use Touch Display Link to hold teleconferences.
④ Attended Users
Use the host function of Touch Display Link.
⑤ Touch Pen
Show touch pen information.
Use Whiteboard mode of Pen Software.
② Open File
You can browse PDF and Microsoft Office files, view images,
and play audio/video.
③ Remote Meeting
Use Touch Display Link to hold teleconferences.
④ Attended Users
Use the host function of Touch Display Link.
⑤ Touch Pen
Show touch pen information.
⑥ Clear Data
Erase data that was used on the monitor.
⑦ Setting
Show the WHITEBOAD mode settings screen.
⑧ Eject USB Media
Appears when a USB flash drive is inserted .
Use when you want to remove the USB flash drive.
*If you use function of ③ and ④ with Touch Display Link
software, please refer to manual of Touch Display Link.
Erase data that was used on the monitor.
⑦ Setting
Show the WHITEBOAD mode settings screen.
⑧ Eject USB Media
Appears when a USB flash drive is inserted .
Use when you want to remove the USB flash drive.
*If you use function of ③ and ④ with Touch Display Link
software, please refer to manual of Touch Display Link.
① ② ③ ④ ⑤ ⑧ ⑨
⑥ ⑦